How do you cover a double height window?

How do you cover a double height window?

Single-story window shades, blinds, or drapes, which cover just the lower bank of windows, are a more budget friendly option suitable for rooms that don’t need total light blocking or privacy control.

What are tall windows called?

Casement vs Awning Windows Casement windows typically refer to windows that set vertically (taller than they are wide) and swing outward. Casement windows can be left or right swing. Awning windows are set horizontally (wider than they are tall) and crank out from the bottom.

How do you cover high ceiling windows?

5 Tall Window Treatment Ideas

1. Drapery. When it comes to tall windows, the most traditional choice is drapery.
2. Roman Shades. If you like the fabrics of drapery, but want a more tailored look, try Roman Shades for your tall windows.
3. Top Down / Bottom Up Cellulars.
4. Motorized Shades.
5. Open Windows.

How do you hang curtains on a tall window?

How High to Hang Curtains. A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

What are high ceiling windows called?

You can call them roof windows, skylights, or rooflights, also spelt as “roof lights.” The names are used interchangeably. But bear in mind that they are different. Most people wouldn’t hesitate to favor ceiling window installation on their properties.

How do you hang curtains with tall ceilings?

The following interior design guidelines should help.

1. Hang curtains at least 4 to 6 inches above the top of the windows.
2. For high ceilings, keep curtains within 8 inches from the tops of windows.
3. Reassess if you have arch or transom window depending on the amount of light and privacy you desire.

How to install window shades?

Measure in from each top corner of the window frame. The distance will vary across manufacturers,so consult your owner’s manual for the exact specifications.

Position the brackets above your markings,and drill pilot holes where the screws should go.

Screw the brackets into place.

Install the shade by hooking the headrail into the front of the brackets. Rotate back until you hear it snap into place.

Finish by lowering and testing your new shade.

How to fix window shades?

Adjust blinds that won’t turn. If your blinds aren’t closing,or if one or two won’t close,this is usually a simple fix.

Patch up holes with a repair kit. In some cases,a blind may develop a hole on one or both ends.

Remove items jamming the blinds.

Use lubricant spray to fix rotation issues.

Check your blinds individually if troubleshooting fails.

Where to buy shades for Windows?

Plantation Shutters See why Blinds.com is the #1 online retailer of custom window coverings With over 25 years online and 25 million windows covered, Blinds.com is the top choice for custom blinds, shades and shutters. Your Windows, Your Way

How to measure for window shades?

– Measure the depth of your window frame, from the front of the opening to the glass. – Measure the width of each window. Measure your width only at the top of the window for roller shades. – Measure the height of your window opening in three places: left, center, and right. Circle the tallest measurement – this is the number you submit for your window’s height. – Order at the exact opening size with no deductions. The factory will take deductions in production. – Double check that your measurements follow the width by height format (W x H).