How high should I mount my dart board?

How high should I mount my dart board?

Regulation dartboard height from the floor to the center of the bullseye is 5 feet 8 inches (1.73 meters). This measurement is recognized internationally and remains the same for both electronic and steel tip dartboards. We recommend measuring and mounting the dartboard first before measuring throw line distance.

How tall is a valley dart board?

Dart Board Height: 5 feet. 8 inches from floor to the center of the bull’s-eye. Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches. To mark the throw line a simple piece of tape will suffice.

What is the distance or height of the dart board away from the oche?

The throwing distance in the game of darts is regulated at 7′ 9.25” | 2.37 m from the oche to the front face of the dartboard. Dartboards must be hung on the wall with the center of the bullseye at 5’8” | 1.73 m from the floor—a height established based on the eye-level of a six foot man.

How far do you stand from a dartboard when throwing darts?

The official regulations state that it should be 5 feet, 8 inches (or 1.73 meters) from the ground. The measurements are applicable to both steel-tipped and plastic-tipped darts.

What number is at the top of a dartboard?

For clarity’s sake, here is the way the numbers on a modern, standard dartboard are organized, from the top position going clockwise: 20, 1, 18, 4, 13, 6, 10, 15, 2, 17, 3, 19, 7, 16, 8, 11, 14, 9, 12, 5. The particular numerical sequence chosen by Brian Gamlin achieves 2 things.

How tall is a Cougar dart board?

1/2″ Tall
Valley Cougar Electronic Dart Board with Honest Ernie Folded Dimensions: 24″ Wide X 36″ Deep X 45 1/2″ Tall BUILT-IN GAMES INCLUDE: 301. 501.

What is the standard size of dart board?

According to the Darts Regulation Authority, a regulation board is 451 mm (173⁄4 in) in diameter and is divided into 20 radial sections.

What is the distance from dartboard to throw line?

7 Feet 9 and a quarter inch
Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch from the front of the dartboard to the front of the Oche (Throwing Line). The throwing distance can also be measures as 93.25 inches, 2.37 meter or 237 centimetres.

Where should a dart board be placed?

Best Place to Hang a Dart Board Find an open space such as the basement, game room, or outside in the backyard. The area should be at least 5 feet wide and 11 feet long. Darts can bounce over 8 feet from the bull’s eye so make sure that you make the proper accommodations.

What is the official height of a dart board?

Dartboard Height from Floor to Bulls Eye The official height of a dartboard from floor to bulls eye is 5 ft. 8 inches (1.73 m). This is eye level for a player who is 6 feet tall. When playing with soft tip darts, the throw line (oche) should be 7 ft. 9 ¼ inches (2.73 m) from the face of the board.

How do you mount a dartboard to the wall?

Place the dartboard onto the Mounting Bracket and check for tightness against the wall. If the dartboard is wobbling, remove and tighten or loosen the Dartboard Mounting Screw as needed. Getting the dartboard’s center screw height adjusted to the proper depth can be a little tricky.

How far should the throw line be from a dart board?

When playing with soft tip darts, the throw line (oche) should be 7 ft. 9 ¼ inches (2.73 m) from the face of the board. This distance should be increased to 8 feet for steel tip darts.

Can you hang a dartboard on plywood?

To protect you wall, you can hang your dartboard on a piece of plywood that covers the surrounding wall. Flooring have been a problematic area for dart players. Concrete, stone, and tile floors can break dart hubs and dull out the points. You don’t want to throw darts on a wood, linoleum, or vinyl floors unless you plan on aerating your floor.

author

Back to Top