How to reset DriveRack PA2?
How to reset DriveRack PA2?
Factory Reset (Hard Reset) – Hold STORE button during power up until the display will shows ‘FACTORY RESET’. Then release the Store button. Now Press the WIZARD button to do the factory reset. Pressing the STORE button will abort the factory reset.
What does DBX DriveRack do?
dbx designed the DriveRack PA2 to be a complete, easy-to-use loudspeaker management system for all types of musicians. The updated AutoEQ algorithm automatically dials in the ideal EQ for each room. It “listens” to your room via RTA mic (not included), analyzes it, and sets the appropriate speaker levels and room EQ.
How do I lock my dbx DriveRack pa2?
– Rotating the wheel to select either Lock, Unlock or Filter Unlocked the system. – Pressing will unlock the system if it were locked or it will lock the system if it were unlocked.
How do I lock my DriveRack?
To lock out the front panel controls press and hold the WIZARD button upon power up (make sure all amplifiers are turned off before performing this procedure). When in the lockout mode, turn the ENCODER until the display reads “System Locked!”.
What is a DriveRack used for?
The DriveRack® series are a diverse group of processors that provide control of equalization and loudspeaker management. Used and appreciated in every kind of venue, from houses of worship to big-name world tours, the DriveRack series are the most popular loudspeaker management systems.
What is the PA2 firmware updater?
PA2 Firmware Updater v1.2.0.0 (Windows) Allows customers to update the dbx DriveRack PA2 via its USB port directly from a PC without the need to use the Control App.
How does the DriveRack PA2 work?
The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound. Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.
How can I hard reset the PA2?
It runs on phantom power (supplied by the Driverack units) and comes with a clip and case. How Can I Hard Reset the PA2? Press and hold the STORE button while powering on the PA2. Wait for the display to read, “FACTORY RESET.” Release the STORE button, and press the WIZARD button.
