What is a Category 0 three point hitch?
What is a Category 0 three point hitch?
Category 0 3-point hitches are almost exclusively found on garden tractors and lawn tractors. They are considered light-duty and accept implements that are 20″ wide. The dimension from the lower pins to the top link pin is typically 12″. Many manufacturers have made tractors with cat.
What is a category 0 hitch?
Category 0 We define the smallest category by upper and lower link pins measuring 5/8 inches in diameter. The spacing between the two lift arms is approximately 20 inches. You find category 0 hitches on light-duty garden tractors with 20 horsepower or less.
What does Category 1 mean on a tractor?
50 horsepower
Tractor-buying tips. Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.
How much weight can a three-point hitch lift?
1356 pounds
Category 1 3-point hitch for maximum implement versatility. Category 1 hitch allows quick hookup of 3-point hitch implements, especially when equipped with the iMatch™ Quick Hitch and/or iMatch AutoHitch™. The lift capacity of the 3-point hitch is 1356 pounds (615 kg) measured at 24 in. behind the hitch balls.
What are tractor hitch categories?
What are the 3-point hitch categories?
| Category | Tractor Power | Lower hitch spacing |
|---|---|---|
| 1 | 20-45 HP | 28 in (710 mm) |
| 2 | 40-100 HP | 34 in (860 mm) |
| 3 | 80-225 HP | 40 in (1,000 mm) |
| 4 | More than 180 HP | 48 in (1,200 mm) |
Will a 3 point CAT 0 hitch fit on a tractor?
Various 3 Point Cat-0 Implements & Attachments. Note►This kit is not made of any specific make or model of tractor. Most of the parts are standard in this hitch kit, with little or no modification it fits to most of the small Cat-0 tractors.
When did the first John Deere tractor have a 3 point hitch?
The first 3 point hitch made by John Deere for their garden tractors was in 1968 to be used on the John Deere 140 garden tractor then followed by the John Deere 400 that came out in 1975. Category 0 (zero) was the size classification that came on the garden tractor.
What are the dimensions of a 3 point hitches?
Fits category 0 three point hitches. The ends are 5/8″ diameter with 1/4″ holes for retainer pins. The (7) holes in the bar are 3/4″ for ball hitches and other pins. Length of the drawbar usable area is 19″. Most other ones on the market only offer the 5/8″ doles on the drawbar body section.
Can you put a 3 point hitch on a John Deere 345?
A: You cannot put a three point hitch on any of the John Deere 345 tractors. You would have to have something like the John Deere 318 and the 400 series tractors. Q: I have a John Deere 318.
