What is Bohler K110 steel?
What is Bohler K110 steel?
Bohler K110 (D2) – Origin Austria K110 more commonly known as D2, is a high-carbon, high-chromium, semi-stainless tool steel. Due to its outstanding hardness, strength, wear and abrasion resistance, K110 has excellent characteristics for making extremely rugged blades and hand tools.
What is D2 steel made of?
D2 Steel Makeup The chemical content for D2 tool steel is 1.4-1.6% carbon, 0.60% manganese, 11.00-13.00% chromium, 0.30% nickel, 1.10% vanadium, and 0.70-1.20% molybdenum. The primary use of this steel is for making stamping dies that cut steel pieces out of other, softer steels.
What is D2 blade material?
D2 tool steel is an air-hardening, high carbon, high chromium tool steel with extremely high wear resisting properties. D2 is commonly used in long production, cold work applications, high wear applications and it is very popular as a knife blade steel.
Is D2 an alloy steel?
D2 Tool Steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure.
Is K110 the same as D2?
K110 is a cold work tool steel from Austria. Analogue K110 is better known as D2 tool steel. It is a dimensionally stable, high carbon, high-chromium (12%) steel. Particularly suitable for air hardening it also has good toughness.
What is Bohler M390 steel?
BÖHLER M390 MICROCLEAN is a martensitic chromium steel produced with powder metallurgy. Due to its alloying concept this steel offers extremely high wear resistance and high corrosion resistance – the perfect combination for best application properties.
What is difference between D2 and D3 material?
Apart from D3 steel all group D steels have 1% Mo and are air hardened. Type D2 steel is the most commonly used steel among the group D steels. The D3 steels contain 1.5 to 2.35% of carbon and 12% of chromium.
Is D2 a super steel?
S30V is also considered true stainless steel; D2 only has enough Chromium to be “semi-stainless.” If money is no object, then you should definitely go with the more expensive one. A number of knife makers say that there isn’t a better blade steel for sale.
Is D2 steel a stainless steel?
D2 tool steel is semi-stainless because it has a high chromium content. D2 also has high carbon content that makes it hard. D2 doesn’t abrade and scratch easily, and wears well. It is used to make tools.
How good is Bohler M390 steel?
Bohler gives five out of five stars to their M390 steel as a tribute to the wear resistance. This metal is extremely high in wear resistance, to the point that it is one of the most durable tools you can buy.
What are the characteristics of Böhler products?
Dimensionally stable, high carbon, high-chromium (12%) steel. Particularly suitable for air hardening. Good toughness. Contact BÖHLER USA about anything related to our products and services and we will get back to you.
How do you heat and cool k110/d2 steel?
Make the steel machinable so that it can be easily cut, drilled, and ground. It’s important to slowly cool K110/D2 as it’s air-hardening and may form martensite rather than the softer, more machinable structures we’re after. Stress relief is typically performed at 650 – 700°C (1202 – 1292°F).
When to use cryogenic treatment on K110(D2)?
To be effective, the cryogenic treatment should be performed as soon after quenching as possible and before tempering. This is because RA transforms into untempered martensite which is brittle and needs to be tempered. Ie: Don’t do a snap temper on K110 (D2) if you’re doing a cold treatment.
How long does it take for k110/d2 to cool?
It’s important to slowly cool K110/D2 as it’s air-hardening and may form martensite rather than the softer, more machinable structures we’re after. Stress relief is typically performed at 650 – 700°C (1202 – 1292°F). Heat for 1 to 2 hours in a neutral atmosphere (SS foil packet, etc) and then slowly cool in furnace / vermiculite.
