How do I remember my pre trip inspection?
How do I remember my pre trip inspection?
The only way to memorize the pre-trip is to repeat it over and over. Start with the engine area and work your way around the truck and finally inside the cab. There is no way around consistent repetition. The more you do it the more you will memorize it.
What is normal to find in a pre trip inspection?
What You Need to Know About The Pre-Trip Inspection. You will have to do thorough safety inspections of the coupling system, the vehicle lights, engine compartment, tires and brakes, the chassis, the fuel tanks, and an in-cab inspection.
What is the pre trip inspection test for a school bus?
School Bus Pre-Trip Inspection Test External Checks School bus is parked with engine on, transmission in neutral, and parking brake set and chocks in place. External Checks 1. Turn on low beam head lights, 4-way flashers, amber loading/unloading lights and exit the bus.
What is the Texas CDL pre-trip checklist test?
Vehicle Pre-Trip Checklist Inspection – Texas CDL Skills Tests: The Texas vehicle inspection test (walk-around) requires the driver to point out vehicle components and explain what you are checking and why to the examiner. This includes an under the hood engine compartment inspection.
What should I look for in a pre trip inspection?
1. Texas CDL Engine Compartment Pre-Trip Inspection This section of the pre-trip inspection is intended to be done with the engine off. Look for puddles on the ground that would indicate a leak. Look for dripping fluids on the underside of the engine and transmission. Inspect hoses for �good� condition and leaks. Indicate the location of dipstick.
What is the Texas vehicle checklist inspection (walk-around) test?
The Texas Vehicle Checklist Inspection (walk-around) test is explained in Section 11 of the Free Texas CDL Handbook (Commercial Driver’s License Manual). In many states, a driver may use the Memory Aid found in the Commercial Driver’s License Manual during the Vehicle Inspection test segment.
