What is E 01 on Epson printer?

What is E 01 on Epson printer?

In this blog post, we will focus on the E-01 error, this error usually appears when there is something wrong with the ink cartridges. The cartridge might be dirty, clogged or the cartridge connectors are unable to get in contact with the printer connectors.

Why is my Epson printer giving me an error message?

Check jammed papers in the printer At times, you might find that the Epson printer is in an error state due to jammed papers. In this case, it is recommended to disassemble the computer to clean the jammed documents. To resolve this, you should make sure to use a cloth piece and a brush, after which you should wipe it.

How do I fix Epson communication error?

Rebooting System

  1. Simply turn off your PC or laptop device.
  2. Remove and disconnect all USB connections.
  3. After waiting for 3-5 minutes.
  4. Turn on your PC and connect it to the Epson printer using the USB cable.
  5. Many times, this system reboot solves the “Epson printer communication error”.

How do I fix my Epson printer jam?

Paper Jam Problems

  1. Cancel the print job from your computer, if necessary.
  2. Gently pull out any jammed paper from the output tray and sheet feeder.
  3. Press the start button to resume printing.
  4. Press the power button to turn the product off.
  5. Lift up the scanner unit, and remove the jammed paper and any torn pieces.

How do I run a diagnostic on my Epson printer?

Hold down the paper button and press the power button to turn on the printer. Then, release only the power button. When the printer starts the operation check, release the paper button.

Why is my Epson printer connected but not printing?

Make sure that your product is turned on. Make sure you install your product’s network software as described in your product documentation. Make sure your computer and product are both using the same wireless network. If network printing is slow, print a network status sheet and check the signal strength.

Why printer is communication error?

The interface cable may not be plugged in securely. Check both ends of the interface cable between the printer and the computer. Your application software is not properly set up for your printer. Make sure that the printer is selected in your application software.

author

Back to Top