Popular guidelines

How do I reset my Brother printer after replacing drum?

author 0

How do I reset my Brother printer after replacing drum?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

How do you reset the drum on a Brother MFC 8890dw?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press Clear/Back on the control panel.
  4. Press 1 to reset the drum counter.

How do you replace a drum on a Brother printer?

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Take out the drum unit and toner cartridge assembly.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.
  6. Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

How do you change the drum on a Brother MFC L2710DW?

How to replace the drum unit:

  1. Make sure that the printer is on and press open the front cover.
  2. Remove the toner cartridge and drum unit from the machine.
  3. Push down the green lock lever and remove the toner cartridge from the drum unit.
  4. Unpack the new drum unit.

How do I clear the error message “replace parts drum”?

The error message “Replace Parts Drum” or “Replace Drum” will continue to appear if the drum counter was not reset when you replace the drum unit with a new one. To clear this error message, you need to reset the drum counter as instructed below.

How do I reset the drum counter on my Brother printer?

Press 1 to reset the drum counter. When the LCD shows Accepted, close the front cover. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations.

Does the brother limited warranty apply to third party drum units?

The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner. If the error message still continues to appear, please contact Brother Customer Service from “Contact Us”.

How do I reset the drum counter on my Kenmore dishwasher?

Press Clear/Back on the control panel. NOTE: The layout of a control panel differs depending on the model, but the Clear/Back button is located on the right side of the LCD screen as shown in illustration. Press 1 to reset the drum counter. When the LCD shows Accepted, close the front cover.

author

Back to Top