How do I reset my brother toner DCP l2540dw?
How do I reset my brother toner DCP l2540dw?
With the front cover open, the LCD should display “Cover is Open”. ii. Hold the MENU button down for 5 seconds until Reset Menu is displayed.
How do I reset my printer after changing toner?
Reset process
- Switch-off the printer.
- Press and hold the on/off button.
- When all the LEDs turn on, open the cover and remove the toner cartridge + drum unit.
- Release the on/off button.
- Re-install the toner cartridge + drum unit back into the printer and close the printer cover.
Why does my printer keep saying replace cartridge?
The message “Replace Toner” is intended to alert you that the toner cartridge has reached the end of its expected life. It is recommended that the toner cartridge be replaced. To clear the “Replace Toner” message, install a new genuine Brother TN420 or TN450 toner cartridge.
How do you change the toner on a DCP l2540dw?
How To Replace Cartridge(s)
- Open the printer cover.
- Remove the toner cartridge and drum unit assembly.
- Push down the lock lever and take the toner cartridge out of the drum unit.
- Remove the new toner cartridge from its packaging.
- Gently shake it side to side a few times to evenly distribute toner inside.
How do you solve a toner problem?
The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge. If it still has toner left inside, install it back in the printer, taking care to insert the cartridge properly. Always turn your printer off before attempting to change a cartridge.
Why won’t my Brother printer recognize toner?
When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the toner status. If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this problem.
How do I reset the toner on my brother dcp-l2540dw?
Below are the instructions to reset the toner for DCP-L2540dw. Brother DCP toner reset is quite simple. Find the procedure below: Open the front cover. Press and hold the “Replace” button. You will now see a message saying ‘replace drum’.
Why brother toner reset is compulsory?
Similarly, brother toners lack the ability to read toner – they are unable to provide an accurate toner level, and thus, and brother toner reset becomes compulsory. Sometimes, when you install a new cartridge, the printer fails to recognize the new cartridge and tells you to “replace toner”. However, you know that the cartridge is new.
How do I change the toner in my brother MFC laser printer?
Open the front cover of your Brother MFC laser printer where you can access its toner cartridge. Press and hold the Hash (#) button for about 5 seconds to see the toner menu on the screen. (The # key will be blacked out. If you are unsure where it is located press fax to find then press clear to perform the reset from your menu)
How do I change the toner cartridge on my Kenmore dryer?
Open the front cover. Remove the toner cartridge and drum unit assembly from the machine. Push down the green lock lever and take the toner cartridge out of the drum unit. Unpack the new toner cartridge. Remove the protective cover. Put the new toner cartridge firmly into the drum unit until you hear it lock into place.
