How do you test an ATV winch switch?
How do you test an ATV winch switch?
The easiest way to test the switch would be to run power directly to the winch, bypassing the switch. If it powers on just fine then there is an issue with the switch or its wiring. You can also check for continuity by removing the switch wires (red is power, black is ground).
What does a solenoid do for a winch?
The winch solenoid is an electronic device used to activate the winch motor on a vehicle-mounted winch. Created to withstand the high draw of electricity required to crank the winch, the winch solenoid is designed to supply the required current without damaging the winch switch or the winch motor.
Can you repair an ATV winch that doesn’t work?
But from time to time, even the best will face some technical issues that need to be addressed. Luckily, there is a lot you can do yourself to troubleshoot and repair an ATV winch that doesn’t work as it’s supposed to. ATV winches are small but still powerful and potentially very dangerous.
How do I know if my winch solenoid is bad?
You can test the solenoid by hooking a test light on the cables that go to the winch. Test first with the blue, then with the yellow. If you don’t get a light with one of them, you likely have a bad solenoid. A good way to protect your new contactor is by slathering it with dielectric grease and make sure it’s placed up high and dry.
How to troubleshoot a winch motor that won’t turn?
If the drum moved slightly when tapping, attach the positive terminal completely. The winch motor should operate as normal in one direction. Then repeat the test by switching the cables on the winch. The motor should then move freely in the opposite direction. Now you should know what causes to look at for further troubleshooting.
How do you activate the winch switch on a winch?
One is activated when pressing the in button, and the other is activated when pressing the out button. When the solenoid works as it should it will physically move when it’s being activated. This is what makes the audible clicking sound when you activate the winch switch.
