Where is the lint trap on my Whirlpool washing machine?
Where is the lint trap on my Whirlpool washing machine?
Where Is the Lint Trap on a Washing Machine?
- Along the top rim of the washer drum: Slide your fingers around the top of the washing basin, and you may run into a screen, which you can pull out to remove lint.
- Inside the center agitator: If you have a top-loading washer, inspect the center agitator.
Is there a filter to clean on a Whirlpool washing machine?
The filter on a Whirlpool Duet is located under the front kick plate. A washer filter collects lint that falls from clothes during the washing process. The lint filter should be cleaned at least once every 6 months. If the lint is not removed, it can cycle back through the washing machine and stick to laundry.
Is there a lint trap in my washing machine?
Your washer’s lint filter may be within the center agitator of a top-loading washer. Remove the cover and check for a lint trap that can be cleaned. A removable lint screen may also be located along the washer drum’s top rim. Mesh lint traps are also commonly found in washer drain hoses.
Where is the filter on a Whirlpool top loader washing machine?
Step 1: Locate the filter Your first step is to find the filter’s location. Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.
How do you clean the lint filter on a top loader washing machine?
Clean a removable lint filter by taking it out of the washing machine and placing it in a sink filled with hot soapy water. Allow the filter to sit in the water for 10 to 15 minutes. Once the filter has soaked, take it out of the water and gently scrub it with a soft brush.
Where is the filter on Whirlpool top load washing machine?
Step 1: Locate the filter Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.
How do I clean my whirlpool top loader?
Instructions
- Empty the Washer.
- Select the Water Temperature and Cycle Settings.
- Fill the Washer With Water.
- Add the Chlorine Bleach.
- Run the Complete Washer Cycle.
- Clean Detergent and Fabric Softener Dispensers.
- Fill the Washer Again With Hot Water.
- Add Distilled White Vinegar.
Technically, the lint trap in most front loading washers is a pump filter. Located on the lower front of the washer, most models, such as the LG, GE, Whirlpool and Splendide, have a filter that catches coins, keys and lint.
Why is my Whirlpool washer not starting?
If the lid switch is faulty, then the washing machine will not start. It may fill with water but will not spin if the switch is faulty. Some lid switches on top loaders also control the water inlet valve. In some top load washers, if the lid switch is bad, the washer will not fill with water.
Where is the lint filter on a whirlpool washing machine?
Some lint filters are located around the top rim of the washing machine tub. If the lint filter is located in the rim, it is important to pull out the screen and remove any clumps of lint that have accumulated. Some lint screens are located inside the agitator itself.
How do I Reset my Whirlpool washing machine?
How To Reset Whirlpool Cabrio Washer: Turn the washer off. Set the mode selector dial to NORMAL. Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT). Now press the start button. All the cycle indicating lights should be illuminated.
