How do I find my pilot light?
How do I find my pilot light?
How to Tell If the Pilot Light Is Out
- Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
- If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
- If you don’t see a flame, your pilot light is out.
- If there is a flame, check the color.
Can you see the pilot light on a furnace?
Once you’ve exposed the furnace burner assembly, look toward the bottom and you should see a dial (usually red) with markings on it that say “on, “off” and “pilot.” That dial is part of the gas control valve, and once you’ve found it, you’re getting close to finding the pilot.
Why is my pilot light not staying lit on my furnace?
Some common causes include issues with the thermocouple and pilot tube. The thermocouple detects the pilot light via sensors. A dirty pilot tube can also prevent the pilot from staying lit. If the pilot tube is dirty, let the furnace cool down and turn off the gas.
What happens when furnace pilot light goes out?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
What do you do when your pilot light goes out?
Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
What can cause a pilot light to go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
What do you do when the pilot light goes out?
What would cause a pilot light to go out on a furnace?
Thermocouple Malfunction The thermocouple on your heating system is a safety device that determines whether or not your furnace pilot light is lit. A thermocouple that is dirty or malfunctioning will often shut off your gas supply in error, causing the pilot light to go out and your furnace to stop working.
Is it bad if the pilot light goes out?
A pilot light is a small flame that is built into your gas heating appliances, such as a furnace or water heater. If the pilot light goes out for any reason, the current stops, the valve closes, thus preventing any gas from leaking.
Where is a pilot light located on a furnace?
A furnace pilot light is a small burning flame located within the combustion chamber of your furnace. Simply known as the pilot light, this device operates as an ignition source for the burner(s) of your furnace. There are also pilot lights within gas-powered water heaters and fireplaces.
How do I find the pilot light on my furnace?
Press down on the control rod and hold it in. Push the button on the igniter and watch the pilot light. Continue pressing the igniter’s button every five seconds until the pilot lights. Wait one minute before releasing the control rod. Verify the pilot is still lit after releasing the control rod. Repeat if the pilot light goes out.
Where is the pilot light switch located on my furnace?
The pilot light is typically in the bottom of the furnace near a small knob . In most cases, this knob has three distinct settings: “Pilot,” “Off,” and “On.” If you are unable to locate this assembly or knob, refer to the user manual for your furnace and try to locate a diagram that can tell you where the knob or switch is on your specific unit.
Where is the pilot light on my furnace?
Where is the pilot light on furnace? Go to the furnace and find the pilot valve. The pilot valve body is a box-shaped device into which the main gas line will run; it is located near the gas burners. It will usually have a gas cock or valve knob that reads ON, PILOT, and OFF.
