How do you splice trolling motor wires?
How do you splice trolling motor wires?
Starts here8:19Extending and splicing trolling motor wires DIY – YouTubeYouTubeStart of suggested clipEnd of suggested clip59 second suggested clipPut your shrink wrap. On. Before you put your sections together put it on get it out of the way. I.MorePut your shrink wrap. On. Before you put your sections together put it on get it out of the way. I. Mean this is a really simple way to do it.
Why does my trolling motor have 4 wires?
To make charging easier, the 4 prong/4 wire system became standard on several bassboats. This, in effect, moved the 4 battery post up to the boat side of the plug and configured them in such a way as the two negatives were side by side and the two positives were side by side.
Are all trolling motor plugs the same?
Unfortunately, most trolling motor plugs and receptacles are not compatible with each other as there isn’t a universal plug design.
How do you hook up a trolling motor to a battery?
24 Volt Systems (2 Batteries)
- Connect a connector cable to the positive (+) terminal of battery 1 and to the negative (-) terminal of battery 2.
- Connect positive (+) red lead (from motor) to positive (+) terminal on battery 2.
- Connect negative (-) black lead (from motor) to negative (-) terminal of battery 1.
How do you wire a 12 volt trolling motor?
Starts here5:49How to Properly Wire 12v, 24v & 36 Volt Trolling Motor Batteries In Your …YouTube
What size wire is needed for a 12 volt trolling motor?
Wire Gauge And Circuit Breaker Size Guide
| Cell | Amps drawn | 15 ft length |
|---|---|---|
| 12 volt | 30 | 8 awg |
| 12 volt | 42 | 6 awg |
| 12 volt | 50 | 4 awg |
| 24 volt | 42 | 8 awg |
What are the three wires on a trolling motor?
The three wire plug is for a 12/24V system. On a 12/24 you have a 12V hot, 24V hot, and a ground.
How do I know if my trolling motor is 12 or 24 volt?
The nameplates are most often found in the foot petals of the motor. Otherwise, you can look at the configuration of the trolling motor batteries to find the volts. Open the hood and look at the battery. If you see 6 cells, it’s a 12-volt battery, but if you see 12 cells, it means it’s a 24-volt battery.
What gauge wire is needed for a trolling motor?
Many trolling motors can be used with 8 gauge wire, however, the length of wire you need and the amperage of your motor can alter the size of wire you need. For example, if you need a longer length of wire, you’ll likely need a lower gauge and therefore thicker wire.
Do trolling motors need a circuit breaker?
It is highly recommended that a circuit breaker or fuse be used when installing a trolling motor. For motors requiring a 60-amp breaker, the Minn Kota MKR-19 60-amp circuit breaker is recommended.
Can I wire trolling motor straight to battery?
In order to wire a 24 volt trolling motor, you will usually need two 12 volt batteries. The circuit breaker should then be connected to your first battery from its negative terminal to the positive terminal on the battery. You will then need to link your second battery to the first.
Why does my trolling motor have 3 wires?
