What is the best tool to cut Hardie board with?

What is the best tool to cut Hardie board with?

A carbide-tipped scoring knife is recommended, but you can also use a utility knife or shears. Never use a high-speed grinder to cut cement board indoors, since this can create a dust hazard.

What blade do you use to cut fiber cement board?

For cutting fiber-cement siding, it’s best to use a 4- to 6-tooth polycrystalline diamond-tipped (PCD) blade made specifically for fiber-cement. Regular carbide blades will cut fiber cement, but they dull relatively quickly, and if you attempt a gang cut, the blades overheat and can warp.

Can I use a grinder to cut Hardie board?

Using Power Tools Here are two of the most common tools used to cut Hardie Boards: Angle grinder. An angle grinder is the preferred tool for fast cuts. While fast and accurate, this tool is much harder to use and control than a circular saw.

Can you cut Hardie board with a wood blade?

There are a few different power tools that you can use to cut cement backer board. For straight cuts, use a circular saw fitted with a carbide-tipped wood-cutting blade, pushing the saw into the material with slow, even pressure. Here’s a little secret: Use a blade with the fewest number of teeth you can find.

Can I score and snap Hardie board?

Using Score-and-Snap The easiest way to cut cement boards—especially for non-professionals—is to use regular cutting equipment. And for Hardie Boards, the most recommended method is the score and snap. This is particularly true for straight and long cuts or where you are working indoors.

Can you cut Hardibacker with a hand saw?

While power saws make it a lot easier, it is possible to cut ​cement boards by hand.

Is cement board stronger than plywood?

If you compare the two configurations using identical thinset mortars, tiles installed over cement backerboard have greater shear-bond strength than those that are installed over plywood. …

What is the size of Hardiebacker 500 cement board?

HardieBacker 500 Cement Board Size: 60in. x 36in. x 1/2in. | SKU: 951309900 $11.97 /piece

Can you cut cement backer board with a knife?

The simplest way to cut concrete wallboard or cement backer board is not to use power tools at all. Similar to the way drywall is cut, it is possible to score the cement backer board and snap it along that scoreline. It is possible to use a drywall knife to score a cement backer board. But it will wear down the blade and take some effort.

Can you cut cement board with a grinder?

Never use a high-speed grinder to cut cement board indoors, since this can create a dust hazard. 1. Place your HardieBacker Cement Board on a flat surface and mark your cuts with a straight edge. 2. Score along your straight edge, applying firm pressure as you go.

Can you cut backer board with a circular saw?

As long as you’re making a straight cut, the circular saw makes for a great method to cut ​cement backer. A word of caution: cutting a Hardie Backer board ​with a saw produces fine silica dust that is crystalline in structure. Such silica dust has sharp edges and will irritate eyes and lungs.