What is a shallow socket set?
What is a shallow socket set?
Shallow Sockets The can fit into tighter spaces and are particularly useful for carrying out jobs on car or motorcycle engines where space is more limited. The majority of DIY enthusiasts will never need anything more than a shallow socket wrench set. Most automotive jobs can be carried out with shallow sockets.
What is a low profile socket?
Low profile sockets Quality socket set featuring a highly polished ratchet wrench that is very comfortable in the hand. Using the ratchet the overall height is a little over 36 mm (1.430), however if you use a ratcheting wrench on the hex the overall height is 22.5 mm.
What is the smallest drive socket set?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 3/4″ Drive |
|---|---|---|
| 5.5mm | 4mm | 19mm |
| 6mm | 4.5mm | 20mm |
| 7mm | 5mm | 21mm |
| 8mm | 5.5mm | 22mm |
What sizes do socket sets come in?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).
What is the difference between shallow and deep sockets?
A normal, shallow socket may not even touch the nut before the top of the stud or bolt hits the end of the socket. In this case, a deep socket is necessary to accommodate the long end of the bolt and fit snugly around the nut. Without them, you may need a wrench instead of a socket to loosen that nut.
How do I choose a socket set?
When selecting a socket set, you should think about where you will be using it as well as what it must include. Instead, try to buy the socket set that will expand your tool collection in the best way, and concentrate on the size range of sockets included, both standard and deep lengths, in metric and imperial sizes.
What are the most common sizes of sockets?
Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets.
What socket is smaller than 7 8?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ | |
| 5/8″ | 24mm | 15/16″ |
Are Harbor Freight impact sockets good?
For a rough and tough set of sockets at a great deal the Harbor Freight sockets are a great buy. However we feel for a few bucks more you can get a much nicer set like the Tekton’s that include the laser etching and storage case.
