What is Traverse cord?

What is Traverse cord?

A cord runs through the rod, too, and is attached to a master slide or pulley. The cord extends beyond the rod so that you can use it to open and close the curtains. Custom drapery that’s made for traverse rods sometimes comes with the pins or hooks sewn into the fabric.

How do you restring a corded curtain track?

Holding the cords taut, push carrier 2 as far to the left as possible. Hook cord over the lug on carrier 2 to secure it. Replace sliders at each end. Re-attach track onto brackets and re-hang curtains.

What is traversing drapery?

A traverse rod makes it simple to “traverse” or move your drapery panels across the window or door. Instead of pulling on the fabric with your hands, you can pull on the cord to smoothly slide the drapery out of the way. Pleated draperies are most often the type you will see installed on traverse rods.

How do drapery rods work?

These mechanical rods operate by using small clips that move along a track that is embedded in the rod itself. This allows the curtain or drape to move smoothly along the rod and prevents any snagging that may happen with traditional curtain rods.

Are traverse rods still used?

Standard rods are still the most preferred curtain rods but the ease of moving curtains through a traverse rod made it into a household name and is now used in modern design homes.

How to hang curtains on a traverse rod?

1. Inserting a drapery pin. Start by inserting a drapery pin. Do this at the curtain’s back,specifically at the center of every pleat.

Step#2. Repeating the process in every drape. Now you have to insert the pin at the back of every drape.

Step#3. Begin with the master overlapping carrier. This step is the mechanism that is responsible for overlapping the drapes one side over the other if the drape is closed.

Step#4. Insert the second pin into the arm base. Do the process by starting from the front this time. It will create a gentle fold onto its arm.

Step#5. Insert the remaining pins into the slides. Do this step one by one,except for the last two pins. Push the spare slide onto the rod’s end.

Step#6. Now slide the last pin into the rod’s hole. You must insert the other last pin on the hole you can find on the bracket.

Step#7. Repeat the process. On the second panel,repeat the same process you did from steps#3 to step#6.

Step#8. Making a vertical crease. Make a vertical crease in front of the material,specifically in between every pleat.

Step#9. Open the curtains again. This time make an attractive wave in the curtains by pulling the pleat and the fabric forward while pushing its middle backward.

What kind of curtains for traverse rod?

One-way traverse rods are mainly used when you have drapes or blinds that can only be moved in one direction. However, the most commonly used type of traverse rods is the two-way rods and allow the curtains to move to each end and away from the middle.

What are traverse rods?

traverse rod. noun. : a metal rod or track with a pulley mechanism for drawing curtains.

What is a traverse rod?

A traverse rod is a sturdy metal curtain rod with a length of cotton cording running through it and a track of evenly spaced small plastic eyes that slide the length of the rod track. The traverse rod is mounted to the wall with metal brackets at each end and at least one center support bracket,…