What is a concentric reducer used for?
What is a concentric reducer used for?
A concentric reducer is used to join pipe sections or tube sections on the same axis. The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. For example, when a 1″ pipe transitions into a 3/4″ pipe and the top or bottom of the pipe doesn’t need to remain level.
What is the difference between swage and reducer?
The function of Swage nipples are the same as reducer. The only difference is that they are generally used to connect butt welded pipe to a socket welded or screwed pipe. Reducer is a component used to reduce the size of main pipe run to a smaller pipe run. They are available only as Butt welded type.
Where is concentric reducer used in pipeline?
Concentric Reducers are useful to connect pipes as well as tubes on the same axis. This type of reducer offers an in-line conical passage between different dimensional pressurized pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.
What is a grooved end fitting?
Grooved end fittings (often referred to as “Victaulic” fittings) are used to join pipes when some amount of flexibility is needed in terms of movement and deflection to the system. This product is available in both Carbon Steel and Stainless Steel.
Where is concentric reducer?
Concentric reducers are used where the pipework is vertically installed and at the discharge side of pumps. Eccentric reducers are more often used when the pipework lays on a pipe rack.
What is a concentric swage?
Concentric Swage Nipple Manufacturer Swage Nipple is a kind of pipe reducer products that used to connect pipes in different dimensions. It has various end forms and TBE (threaded both end) type is very prevalent among concentric swage nipples.
What is the use of reducer in piping?
A reducer is a kind of pipe fitting used in process piping that reduces the pipe size from a larger bore to a smaller bore (inner diameter). A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system, or to adapt to existing piping of a different size.
What is grooved pipe used for?
Grooved pipe couplings and fittings are used to join and pipes in both wet and dry system. They provided some flexibility in terms of movement and deflection to the piping system. The concept of grooved coupling was invented in 1925 when Victaulic design the first mechanical coupling.
What is the use of concentric and eccentric reducer?
Concentric reducers are used where the pipework is vertically installed and at the discharge side of pumps. Eccentric reducers are more often used when the pipework lays on a pipe rack. Because of the flat side, aligning and securely mounting the pipes to the rack is easier.
Why concentric reducer is used in pump discharge?
If concentric reducer are used, their upper part allow accumulation of trace amounts of air or vapours at the pump section. This can lead to creation of gas bubbles near the pump section. Eccentric reducer is typically installed at the centrifugal process pump suction.
