What are the specifications of a print document?
What are the specifications of a print document?
Here’s a list of the 12 basic specs every printer needs to know about your job.
- Job name and description. This is for easy reference.
- Delivery date requested. The date you need it is key.
- Quantity. How many do you need?
- Flat size. What size is the piece before it’s finished or folded?
- Finished size.
- Page count.
- 7 .
- Inks.
What are artwork specs?
Art specifications and requirements
| PRINTED SIZE | MIN. IMAGE DIMENSIONS | IMAGE RESOLUTION |
|---|---|---|
| 3.41″ x 2.56″ | 1024 x 768 pixels | 300 dpi |
| 4.27″ x 3.20 | 1280 x 960 pixels | 300 dpi |
| 4” x 4” | 1200 x 1200 pixels | 300 dpi |
| 4″ x 6″ | 800 x 600 pixels | 300 dpi |
How do you describe a digital print?
What is digital printing? Digital printing is the process of printing digital-based images directly onto a variety of media substrates. There is no need for a printing plate, unlike with offset printing.
How do I create a digital file to print?
How to prepare your digital file for printing
- Save files as PDF, TIF, JPG or EPS files.
- Use CMYK instead of RGB.
- The colors on your monitor will not match exactly.
- Set the image resolution to 300 dots per inch.
- Check the bleeds.
- Don’t get cut off.
- Check the proof.
- Try again.
What specifications should I look for to get good quality prints?
Well, 150 pixels per inch (ppi) is the standard resolution for high-quality prints. If you divide the image’s width and height by 150, you get the rough dimensions (in inches) of the print you can get.
What are two important parts of digital printing?
The two most common digital printing methods in use today are electrophotographic (toner based) and inkjet (ink based). Both technologies are used in a wide range of printing devices from small desktop printers to large high-volume, high-speed digital presses.
What is digital Print Art?
A general term for any print that incorporates digital technology into the creation of an image or its printing. Until the mid-1990s, most digital images that artists made on the computer were transferred photomechanically to traditional printing plates.
How do I prepare digital art for printing?
1. The Simple Steps to Create Print-Ready Artwork
- Choose a file format. PDF usually works best.
- Add a bleed area. Most printing requires a 2mm to 4mm bleed area.
- Embed all fonts or convert to vector paths.
- Save your artwork as a single-layered image using a CMYK colour model.
What size should digital photos be for printing?
4×6: 4×6 prints measure approximately 4” x 5 ⅞”. This is the standard size in the photofinishing industry because this print size mirrors the aspect ratio of most digital cameras viewfinder. 4×6 prints are perfect for framed photos, cards and for a physical backup of any of your favorite digital images.
What is a good resolution for digital art?
It is recommended that digital art be made at a resolution of 300 dpi, which can also be used for print. If you work at a higher resolution (pixels per inch), your work will be more detailed. A high resolution allows you to print large prints of your digital art.
What is the minimum input resolution for printing to plate?
(A minimum of 300 dpi input resolution for graphic elements is required for good reproduction when outputting to plate). Avoid scaling in composing application in excess of 20 percent plus or minus, in order to maintain full resolution. Total Ink Coverage – McLaren recommends that a Total Ink Coverage should not exceed 240%.
What are the minimum requirements for text text printing?
Text should be black only. Large black areas should be rich black to ensure better print quality. Rich black values should be 100k, 60c, 40m, 40y. Line screen – McLaren produces plates at 175 lpi. (A minimum of 300 dpi input resolution for graphic elements is required for good reproduction when outputting to plate).
What is XY resolution for 3D printing?
XY resolution is the most talked about specification for stereolithography (SLA) 3D printers. In many circumstances, it also happens to be the most useless. Typically, XY resolution is used to describe the details or features of a part.
Can the Form 3L print at 25 micron layer thickness?
ᶜ The Form 3L and Form 3BL are capable of printing at 25 micron layer heights, but we are only planning to release one 25 micron print setting for our large format printers. Please submit feedback to our support team if your application requires 25 micron layer thickness.
