How do you remove a captive bead ring?
How do you remove a captive bead ring?
Captive Bead Ring Removal
- Grab the jewelry by ring with the index and thumb of one hand.
- Grab the bead or ball with the index and thumb of the other hand.
- Pull and apply force in opposite directions causing the tension that the ring has on the ball or bead to break.
- Once the ball or bead is free, rotate the jewelry out.
How do you open a continuous ring piercing?
To open your continuous twist ring you find the opening where the 2 ends meet and hold each side of the ring, either side of the opening, one side in each hand. Then, at the same time, you then move one hand towards your body and the other hand away from your body, this creates the ‘twist’, and opens the ring.
Which way do you twist a ball piercing?
Balls are screwed tight to the right and to loosen you need to screw to the left.
How do you open a captive ring?
Hold the ring steady with your free hand and push the captive bead into the open segment of the ring. The captive bead should pop into place. If the open segment is too narrow, you can use the ring opening pliers to expand it slightly.
How do you remove a seamless ring?
Despite the name, seamless nose rings actually have a break in the middle. In order to take out your nose ring, you’ll need to make it come apart at that break point. To achieve this, hold the ring in both hands and twist it, gently but firmly. It should come apart at the break.
How do you remove a continuous cartilage hoop?
To open an infinite hoop, gently pull vertically to dislodge the post from the tube wire. Be careful not to bend or twist the hoop excessively as this may cause breakage. Once the hoop is open, you are able to add any charms, and open the hoop vertically to fit the post through your piercing.
How do you get a captive bead piercing out?
Carefully touch one end of the ring to the piercing hole and rotate the ring, being careful to allow it to slide through the piercing. This may take some practice and gentle prodding. Again, don’t force it. If you feel your captive bead ring catch or think it’s not going in the right direction, remove the ring and try again.
How do you remove a stuck bead from a ring?
Grab the jewelry by ring with the index and thumb of one hand. Grab the bead or ball with the index and thumb of the other hand. Pull and apply force in opposite directions causing the tension that the ring has on the ball or bead to break. Once the ball or bead is free, rotate the jewelry out.
How do you put in a captive bead ring?
To put a captive bead ring in, first, make sure both the jewelry and your hands are clean. If you bought the jewelry from a piercing studio and kept it in its package, it should be fine. Open the new CBR using the same method you did the last one.
How to remove jewelry by hand?
Small gauge jewerly (18g to 12g) can usually be removed by hand by taking the following steps: Grab the jewelry by ring with the index and thumb of one hand Grab the bead or ball with the index and thumb of the other hand Pull and apply force in opposite directions causing the tension that the ring has on the ball or bead to break.
