How do you program a 2009 Chevy key fob?
How do you program a 2009 Chevy key fob?
PRESS and HOLD the Trip Odometer Reset Button for 3 seconds until “REMOTE KEY LEARNING ACTIVE” displays. Vehicle is now in Programming Mode. PRESS and HOLD LOCK and UNLOCK buttons at the same time on the first remote for 15 seconds. The vehicle will emit a sound indicating successful programming of the remote.
How do I reprogram my Impala remote?
How to Reprogram an Impala Key Fob
- Enter your car with the ignition key and keyless remote.
- Insert your key into the ignition and turn it to the “On” position.
- Press and hold the radio’s “DISP” button until the settings menu pops up.
- Press the down button on the radio until the display reads “FOB PROG.”
How do you program a key fob for a 2009 Chevy Malibu?
How to Program Chevrolet Malibu Remotes
- Enter your Malibu and close all the doors.
- Insert your key into the ignition.
- Press and hold the “Unlock” tab on the driver’s side door as you insert and remove the key from the ignition three times.
- Release the “Unlock” tab.
- Repeat Step 4 for any additional remotes.
Does a 2009 Chevy Impala have a chip in the key?
One Transponder chip key for 2009 Chevrolet Impala – brand new, aftermarket (NO GM logo). This key must be professionally cut when received by a local automotive locksmith (click here for Locksmith Search ) or hardware store.
How do you remote start a 2008 Chevy Impala?
Chevy Impala: How to use the Factory Remote Start
- Lock or re-lock your car using the FOB.
- Immediately press and hold the circle arrow button for 5 seconds.
- You’ll notice the front and rear blinkers blink twice, in a few moments your Impala will be running!
Can I program any remote to my car?
Hi there. You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle. Remove the battery cables from the vehicle, wait 30 seconds, then hook them back up (reset computer). Put the key in the ignition and turn the key to the ‘ON’ position.
