What is ezuhf R/C control system?
What is ezuhf R/C control system?
ImmersionRC | EzUHF R/C Control System 3 Overview The EzUHF R/C control system is a reliable R/C control uplink for FPV and UAV pilots who desire a robust control system for safe control at longer distances.
How do I power the ezuhf transmitter?
2) Power supplied via the DC power jack. In cases where the R/C transmitter either doesnt provide power via its trainer connector, or when a lower voltage is available (2s radios for example), it is preferred to power the EzUHF via the DC power jack. The power jack is center-pin positive, 2mm internal pin, 5.5mm outer diameter.
How do I bind the ezuhf TX and RX to the radio?
The binding procedure is as follows: 1) Connect suitable antennas to both the EzUHF Tx, and Rx and place them within 1m of each other 2) Connect the EzUHF Tx to the R/C Transmitter, switch to low power mode, hold down the pushbutton, and turn on the radio. 3) As soon as a periodic beeping starts, let go of the button.
Do I need a license to use ezuhf R/C?
The EzUHF R/C control system transmits on radio frequencies which may require a license for use. The specific band of frequencies is firmware-dependent, and in some cases may be tailored to meet a retailer/distributors requirements. The default band used is 433-435MHz, which falls in the 70cm Amateur Radio band.
