What is the size of a cassette tape cover?

What is the size of a cassette tape cover?

Universal size fits any standard cassette tape and accommodates original J-cards for art preservation and content identification. Each holds one cassette tape and measures approximately 4.25 inches long x 2.75 inches wide x . 6 inches high.

Do cassette tapes have different sizes?

Listing them in order of their popularity, the three tape sizes are: Micro Cassette. Standard Cassette and. Executive Cassette.

What is a cassette cover called?

A J-card is the paper card inserted in the plastic storage case of most audio cassette releases, as well as being latterly wrapped around the outside of many Blu-ray and DVD steelbooks and similar special editions. Today, custom made CD-R covers are often called J-cards.

What size is AJ card?

Both fold down to the standard 2 in. x 3.5 in. size.

How do you customize a cassette tape?

To make your custom cassette mixtape, place one cassette tape album on the well that only plays tapes . place a blank tape on the well that can play and record. Play the tape and when the track you want is on, press PLAY and RECORD together.

How do I tell what size my cassette is?

CASSETTE: Cassettes are easy, as the length is stamped on the shell somewhere, or on the label. Common lengths are C15, C30, C45, C60, C90 or C120. Because cassettes run at a standardized tape speed, 1 7/8 Inches Per Second (IPS), the label indicates the time, in minutes, the cassette could record – on both sides.

How do I know what kind of cassette I have?

The number of cogs determines the type of chain (10 cogs = 10-speed chain) and of course the type of cassette you’ll want to order. (in our case a ten-speed) The two teeth counts tell you which cassette you’ll need. In our case it would be an 11-42 cassette.

How do you repair a cassette tape?

Take the reel from the new cassette and cut the tape about 1-2 inches from the end of the leader tape. This will give you a brand new reel, and a nice piece of tape to splice the broken tape onto. Remove the old reel from your cassette, and replace it with the reel you just cut from the new cassette.

How do I put music on a cassette tape?

Insert a blank cassette in the tape deck, rewind to the beginning, and press the Play and Record buttons simultaneously (on many models), then immediately press the Pause button. On some tape decks, it is necessary only to press the Record button to start recording.

What is the size of a cassette tape case?

Universal size cases fit any standard cassette tape and accommodate original J-cards for art preservation and content identification. Each case holds one cassette and measures approximately 4.25 inches long x 2.75 inches wide x .6 inches height .

What are the dimensions of a cassette tape?

The standard length of audio cassettes is 4 inches, the average height is 2.5 inches while the usual width is 0.15 inch. Philips Corp. invented it in 1962, which was smaller than the reel-to-reel tape cartridge that was introduced by RCA Victor in 1958. Its trademarked name was Compact Cassette.