Why is my Kreepy Krauly not moving?
Why is my Kreepy Krauly not moving?
If Kreepy Krauly is not moving or not pulsating. Check that the main drain and all suction lines are closed, except for the suction line to which Kreepy Krauly is attached (usually a skimmer). Check for debris in the filter or [pump basket]. Check for debris in Kreepy Krauly flapper.
How do you put weights on kreepy krauly?
Hose weight placement depends on the depth of the pool. For pools 4′ deep or less, use 1 hose weight 4″ to 12″ from the cleaner. For pools of 4-7′ deep, use 2 weights, one 4″ to 12″ from the cleaner and one 6′ from the cleaner. For pools from 8′ to 12′ deep, use a third weight, placed 10 ft.
Why isnt my automatic pool vacuum working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
Why does my pool cleaner stop moving?
How to troubleshoot Kreepy Krauly?
Kreepy Krauly Troubleshooting Kreepy Krauly Troubleshooting Steps. If the kreepy krauly has stopped moving or not pulsating, there are simple… Sufficient Suction. The most common reason kreepy krauly stops functioning is that there is a lack of suction getting to… Clogged Kreepy Krauly. If you
How do I keep Kreepy Krauly from getting stuck under my ladder?
This will keep Kreepy Krauly on the pool’s floor and away from pool obstructions. Make sure the narrow end of the wall climb adjuster points down to the drive tubes. If Kreepy Krauly gets stuck under your pool ladder, install a Ladder Guard (Part #K12330) according to the instructions contained in the packaging.
How do I check for kinks in my Kreepy Krauly hose?
One way to check for kinks in your hose is to lay each section flat on your pool’s deck (or other flat surface). The hose should be perfectly straight and flat. Do not coil the hose when taking your Kreepy Krauly out of the pool because it will retain the coil shape, forming a bend or kink.
How do you shorten A Kreepy Krauly bumper strap?
• Shorten the roller bumper strap by 1⁄2 inch. (Pull out upper end of bumper strap from locking end clip attached to swivel head. Cut 1⁄2 inch off, then return bumper strap into locking end clip.) If Kreepy Krauly tracks in a repetitive pattern.
