How much does checker plate weigh?
How much does checker plate weigh?
Chequer Plate
| Chequer Plate | Kg / Sq Metre | Kg / Sheet |
|---|---|---|
| 10mm x 3600 x 1500 | 78.5 | 423.9 |
| 3mm x 2400 x 1200 | 24.02 | 69.178 |
| 5mm x 3600 x 1500 | 40.03 | 216.162 |
| 6mm x 2400 x 1200 | 48.04 | 138.355 |
How is stainless steel Chequered plate weight calculated?
The weight of the plate is calculated by the volume multiplied by the density. The SS 304 Chequered Plate Weight depends on its density of 8 grams per centimeter cube. The different material grades have different densities and therefore the weights differ as well.
How much does 20mm steel plate weigh?
Weight of Steel Plates by Thickness/Width
| Plate Thickness (mm) | Weight (kg/m) | kg/meter (width 1500mm) |
|---|---|---|
| 12 | 94.2 | 141 |
| 16 | 125.6 | 188 |
| 20 | 157 | 236 |
| 22 | 172.7 | 259 |
Is code for Chequered plate unit weight?
10.2 Unless otherwise agreed the normal dimensions of chequered plates (excluding raised portion), the rolling and cutting tolerances on width, length and thickness (excluding raised portion) shall be as given in IS/IS0 7452. Unless specified otherwise, the minimum bead height of chequered plates shall be 0.8 mm.
Is 2062 Chequered plate?
IS 2062 Gr. b Hot Rolled Mild Steel Plates, Buy Large Quantity From IS 2062 Grade B Carbon Steel Sheet At Lowest Price In India. The use of a Mild Steel Checker Plate is in applications where the level of stress is not very high. The Mild Steel Chequered Plate has a special use for general fabrication as well.
What size is a checker plate steel?
Orrcon Steel structural steel hot rolled plates and checker plate are supplied in accordance with AS/NZS 3678 thickness ranging from 3mm to 100mm and 2.1mm to 6mm for checker plate.
How do you measure the thickness of a Chequered plate?
When measuring, you should first use a micrometer in order to measure the base plate of your checker plate. Calculate the average. This gives you the thickness of the tread plate.
How to calculate the weight of chequered steel plates?
Weight of chequered plate (kg/m²)= thickness (m) x 7.85 (kg/m³) + 6.1 If you want to find weight of total plate to be used in project, then Total weight of chequered plate (kg) = Length (m) x Width (m) x (Thickness (m) x 7.85 (kg/m³) + 6.1(kg/m²))
How do you calculate the weight of a steel plate?
Calculate the volume of the chequred steel plate by multiplying its thickness (t in cms) × width (w in cms) × length (l in cms ) to get the volume (V in cm^3) of the chequred plate. V = twl cubic centimeters, Multiply the volme with density of the steel plate which is 7.8 gms/cm^3. You will get the weight (wt) of the chequered plate in gms.
What is the checkered plate use?
With rough surface, weather-resistant and low-wear, checkered plates can be used as floor board, factory stair boards, deck board and car boards, horse trailers and truck cover, loading ramps, building storage system. Perforated checker plates are used for sorting and screening any material from sugar, sand and gravel.
What is weight of steel plate per square foot?
A steel plate with a thickness of three-sixteenths of an inch weighs 7.65 pounds per square foot. Steel plate sheets with this thickness typically measure 10 feet wide by 40 feet long and weigh 3,060 pounds, or 1.53 short tons. Steel plate sheets with a thickness of 10 inches weigh 408 pounds per square foot.
