Other

How do I reset my Honeywell battery operated thermostat?

author 0

How do I reset my Honeywell battery operated thermostat?

Factory Reset the Thermostat

  1. Ensure that your thermostat is turned off.
  2. Open the door of the battery compartment.
  3. Now take out the batteries.
  4. Put the batteries back on in reverse to the indicated polarity by the markings in the battery holder.
  5. Allow the batteries to stay this way for about five seconds.

How do you set up Honeywell thermostat?

To set up a Honeywell Wi-Fi Color Touchscreen Programmable Thermostat, turn the unit on, follow the on-screen prompts, select your preferred wireless network, and register online to activate remote access. You must install the thermostat before the set up process can begin. When powered on,…

How to install a Honeywell thermostat?

Take off your old thermostat safely. First,cut the power to your furnace before you start the furnace.

  • Score outside of thermostat and remove wires. Score the outside of the thermostat to make sure you don’t cause any more damage to the paint.
  • Get your new Honeywell Thermostat.
  • Connect the wires.
  • Turn on your furnace&set the temperature.

    • How do you program a Honeywell thermostat?

    Set the Time Push the SET button until the time or day display begins to flash on the screen.

  • Set the First Program Press the SET key,then press the key labeled “SET SCHEDULE”.
  • Set the Next Program Upon locking in the last temperature period for Mon-Friday,the next press of the NEXT key will activate the next program available on your
  • Completing the Program and Making Adjustments A simple press of the DONE button locks in the program and closes the setup menu.
  • Overriding the Program

    • How do you troubleshoot a Honeywell thermostat?

    Put your thermostat to cool mode. Listen for the compressor to kick on. Cooling troubleshooting complete. Note: if you’re controlled environment is noticeably warmer, leaving the system in cool mode until the rooms reach the set temperature, the compressor will turn off, then on later to maintain the set temperature.

    author

    Back to Top