What is an axle scale?

What is an axle scale?

Axle Scales for Commercial Vehicle Weighing Weigh-In-Motion Scale Systems maximize efficiency by allowing rapid axle weighing of large numbers of vehicles. They are built to withstand heavy use on a variety of surfaces, allowing transport operators to check vehicle axle and gross weights virtually anywhere.

How do I weigh my truck axle?

First, stop with only your steer axle on the platform to get your steer axle weight. Continue until both the steer axle and the drive tandems are on the platform. This gives you the tractor weight. Subtract the steer axle weight from the tractor weight (so 2 minus 1), and you have the weight for your drives.

How much does it cost to scale a truck?

As with many large equipment purchases there are many models and options which will impact the cost. The short answer to how much does a truck scale cost is $45,000 – $100,000.

How do you weigh a truck with portable scales?

It should be noted that, with portable truck scales, each axle must be weighed individually. To calculate the net weight of the truckload, all that is needed is to add the measurements of all of the axles, and then subtract the weight of the empty vehicle.

How does a truck scale work?

Truck scales work by measuring weight through mounted levers connected to a balance mechanism or through sensor load cells that deliver information to electronic equipment. These concrete or steel scales are designed to weigh large trucks and commercial vehicles, while either in motion or stopped.

How do car scales work?

The “scale” of a model is it’s size relative to the size of the “real” version. So compared to a 1:24 scale model, the real version is 24 times larger in size or 1:1 in scale. The model on top is “1:18 Scale”, which means it is one eighteenth the size of the real thing.

What is the legal axle weight for trucks?

In addition to Bridge Formula weight limits, Federal law states that single axles are limited to 20,000 pounds, and axles spaced more than 40 inches and not more than 96 inches apart (tandem axles) are limited to 34,000 pounds. Gross vehicle weight is limited to 80,000 pounds (23 U.S.C. 127).

How do truck scales work?

How accurate are truck scales?

Some will say, “Truck scales are calibrated for the much heavier weights of the big rig trucks. Such scales operate best in their mid-range, therefore inaccuracies occur when weighing RVs, which may be only 1/3 the weight or much less of a loaded semi-tractor/trailer combination.”

How much weight can a truck scale?

The federal vehicle weight limits are 80,000 pounds gross vehicle weight, 20,000 pounds on a single axle, and 34,000 pounds on a tandem axle group. States, however, often have different limits.

What is a single axle truck used for?

A single axle truck is a type of large truck that uses only one drive axle in the rear. This type of truck is commonly used as a city delivery truck, while the tandem axle truck, which uses two drive axles, is commonly used for long-haul trucking.

What is a portable axle scale?

“Portable Axle Scales for Easy Weighing As an alternative to larger forms of truck scales, more farmers in the U.S. are turning to portable axle scales (or “axle pads”), which allow them to quickly check weigh inputs in the truck at seeding time or product right off the fields before it goes to market or the grain bin .

How many axles on a flatbed truck?

The number of axles on a truck depends on the type of truck and can range from two to five axles, but If there are additional trailers attached to the truck, the number of axles may exceed five. The average four-wheel truck has two axles, while 18-wheel trucks have five.

What is a commercial truck scale?

The truck scale is a 10′ X 70′ platform and is capable of weighing vehicles up to 120,000 pounds. Because of the open layout of our facility and the scale, we are capable of weighing most commercial, oversized loads. The scale is operated by employees who are all state certified weighers.