What is a code 62 flange?
What is a code 62 flange?
High pressure or Code 62 Flanges are all rated for 6,000 psi maximum working pressure. Caterpillar style flanges are designed and used only on Caterpillar equipment. Caterpillar Flanges are identical to Code 62 dimensionally except it has a thicker dimension C.
What is a SAE flange?
SAE Flanges are made to SAE J518/ISO 6162 standards and are designed for hydraulic applications. SAE Flanges are also known as code 61 flanges or code 62 flanges. Because of the o-ring seal design, SAE flanges provide connections with reasonable assemble torque range. Material: SAE Flanges are made of ferrous material.
How do I know what size flange to get?
Use a ruler or measuring tape to find the diameter of your nipple (the horizontal width across it) in millimeters (1 cm = 10mm). Measure the nipple alone, do not include the areola, which is the outer edge around your nipple. Add 4 mm to this measurement, so if your nipple is 20 mm across, your flange size is 24 mm.
What are SAE flanges?
What is SAE J518 Code 61 and code 62?
SAE J518 Code 61 and Code 62 4-Bolt Flanges SAE J518 is commonly used world wide to connect larger sizes of hose and tubing (3/4” to 3”) in fluid power systems.
Are J518 and Din 20066 flanges interchangeable?
The SAE J518, DIN 20066, ISO/ DIS 6162 and JIS B 8363 are interchangeable, except for the bolt sizes. Plus, the -10 is not available as an SAE standard size. Though Caterpillar flanges have the same flange OD as SAE Code 62, they incorporate a thicker flange head (note the “C” dimension in the table below).
What is the SAE code for 4 bolt flange?
SAE J518 Code 61 and Code 62 4-Bolt Flanges. SAE J518 is commonly used world wide to connect larger sizes of hose and tubing (3/4” to 3”) in fluid power systems.
What is the PSI of a jaj518 flange?
J518 flanges come in two pressure classes. The standard series, Code 61, which goes to 3,000 psi and the high pressure series, Code 62, where all the sizes are rated at 6,000 psi.
