What is a NEMA 5 20P plug?
What is a NEMA 5 20P plug?
A NEMA 5-20P power cord plug features a blade formation with a circular ground, one horizontal prong, and one vertical prong. The female connector side is referred to as a “T-Slot”, which accepts both the 3-Prong 5-15P male plug as well as the 5-20P male plug. These cables are rated for 125V electrical systems.
What is a NEMA 5 plug?
The NEMA 5-15P is a 3 Wire grounded plug featuring two blades (can be equal or unequal widths due to the ground pin forcing polarity) and one ground pin rated up to 125V AC and 15 Amps. The ground pin can be either a rounded shape or a U Shape depending on the manufacturer, but both are functionally the same.
What NEMA 5 rating?
NEMA 5 enclosures are intended for indoor use primarily to provide a degree of protection against settling airborne dust, falling dirt, and dripping non-corrosive liquids. water during occasional, temporary submersion at a limited depth.
What is the difference between NEMA 6 20P and 6 20R?
The NEMA 6-20P is a 3 Wire grounded plug featuring two blades and a ground pin, rated up to 250V AC and 20A. The 6-20P has a horizontal and vertical blade to prevent attachment to lower ampere rated receptacles. However, the 6-20R (receptacle) offers a “T” slot allowing connection of both a 6-20P and a 6-15P.
Can you use a 15A light switch on a 20A circuit?
You can’t use a single receptacle on a single branch circuit. In the case of a branch circuit, a 20 amp circuit will work really well! In short, a 15 amp switch can be used all over a 15 amp circuit. But for a 20 amp circuit, the outlet has to be a singular 15 amp one.
What is a NEMA 5 20 plug used for?
The NEMA 5-20P is used in applications that require higher power draw such as large refrigerators, space heaters, large kitchen mixers, etc. The 5-20R T-Slot receptacle allows you to plug in either a 5-20P or a 5-15P plug, allowing greater flexibility.
What is a 5 20 plug receptacle?
The 5-20R T-Slot receptacle allows you to plug in either a 5-20P or a 5-15P plug, allowing greater flexibility. In modern home installations, 5-20R T-Slot receptacles are often used when 20A circuits are installed due to flexibility of being downward compatible with the 5-15P.
What size wire do I need for a 5 20 plug?
NEMA 5-20 Plug, 20Amp, 125 Volt, 2-Pole, 3-Wire (UL) US Listed. Provide a cable of applicable ampacity, service and temperature rating suitable for the conditions of use and location. The plug is designed for use with 3 Conductor Cables with a diameter from.300” to .480” (18/3 SJ through 12/3 S).
How to use a 5-20P pigtail power adapter?
Use a 5-20P pigtail power adapter to plug an electronic device with a 5-15P or 5-20P power plug on its power cord into a standard 5-20R power strip or outlet. Made with industrial industrial grade plugs and connectors and heavy-duty SJT jacket.
