Common questions

What ports need to be open for NetBackup?

author 0

What ports need to be open for NetBackup?

The new service listens, by default, on port 5637 which must be open inbound from the other NB servers and the OpsCenter hosts. The Co-Pilot feature requires the TCP port for 8446 to be open inbound to the NetBackup appliance from the master server to manage the NFS shares.

What are the NetBackup ports?

NetBackup client ports

Source Destination Port
Client Master server 13724 *
Client Media server 1556
Client Media server 13724 * *
Client MSDP server 10102

How do I check my NetBackup?

Description

  1. The base version of the NetBackup client software can be found in the file: \Veritas\NetBackup\bin\version.txt.
  2. Maintenance Pack information (if installed) can be located in the file: \VERITAS\Patch\history.log.

How do I get client list on NetBackup?

Here is a small script to get the list of policies configured against a list of clients using netbackup commandline. Command used is bpplclients to get the clients. Put the list of policy in a file /tmp/policy_list….Netbackup Script to get client Vs policy list.

Policy Name Clients
policy01 client01
client02
policy02 client01
policy03 client01

What ports need to be open for FreePBX?

The default installation of FreePBX is configured to use UDP port 5060 as the SIP signaling port and UDP ports 10000-20000 as the RTP Media ports. These ports must be forwarded to your FreePBX System using your router/firwall configuration.

Is port 1556 TCP or UDP?

Service Name and Transport Protocol Port Number Registry

Service Name Port Number Transport Protocol
veritas-pbx 1556 tcp
veritas_pbx 1556 tcp
veritas-pbx 1556 udp
veritas_pbx 1556 udp

How do I check my NetBackup appliance OS?

To check NetBackup Appliance 5220 version information, enter Main_Menu > Manage > Software then run the command ‘List Version’. This command shows the appliance version, the NetBackup version, and the appliance build date.

How do I know if NetBackup is running on Linux?

Display the current NetBackup services. If the settings were configured while the backup and the restore services were online, they may not be in use by Veritas Access. To display all of the configured settings, first run the Backup> stop command, then run the Backup> start command.

How do I remove a client from NetBackup?

To remove the clients:

  1. Select Policies in the NetBackup Administration Console.
  2. Select Summary of all Policies > Clients (Figure 1)
  3. Sort to find the desired client names in the clients pane on the right.
  4. Remove any client names that are no longer valid for backups.

What ports need to be open for asterisk?

Port ranges for Asterisk: For SIP protocol, open UDP (NOT TCP) port 5060 (SIP) Open ports 10000-20000. Open UDP port 4569 (IAX)…Port ranges for voiptalk:

  • UDP Port 5060 is for SIP communication.
  • UDP Port 5060-5082 range, SIP communications.
  • UDP Port 10000 – 20000 is for RTP – the media stream, voice/video channel.

What ports does Sangoma connect use?

Ports by Switchvox

Transport Port(s)
D-Series Phones
UDP 5062
Sangoma Connect Mobile
TCP/UDP TCP/UDP 5060 5061 (SIP TLS)

author

Back to Top