How do I connect my Triax box to my TV?
How do I connect my Triax box to my TV?
How to install a Triax TR112 Saorview Set Top Box
- Unpack the box:
- Push the lead from the UHF aerial into the ‘RF IN’ plug.
- Connect the HDMI lead (or scart lead) from the box to your TV.
- Plug in the power lead.
- Turn on the power switch on the back on the box.
How do I set up Triax TSC114?
How to Install the Triax TSC114 Saorview Combo
- Open the outter cardboard packaging.
- Remove the Triax TSC114, HDMI Cable and Power Unit from the box.
- Connect the HDMI cable to your TV (or scart cable if HDMI not available)
- Connect your aerial lead to the ANT in on the back of TSC114.
How do you rescan a Triax box?
How To Manually Tune in a Satellite Channel
- Press ‘Menu’ button.
- Scroll down and select ‘Installation’ option.
- Enter Password ‘0000’
- Select ‘TP Scan’
- Type in Frequency, Polarity, Symbol and Specify ‘Free’ Channels only.
- Select ‘Search’
- Additional channels are added to the end of the channel list.
How do I reset my saorview box?
Unplug the TV and set top box. Wait about 30 seconds and then plug everything back in again. Turn on your TV first, and then the set top box. On rare occasions, a re-scan is required to allow your Saorview set top box or Saorview TV to update itself with either new channels, or a change of channel frequency.
How do I reprogram my antenna channels?
How to Rescan your TV Antenna
- Press the menu button on your remote.
- In your TV’s menu, look for the channel setup option.
- Select antenna or tuner.
- Start a new scan.
How do you retune a saorview box?
Re-tuning is simple, go to the menu on your tv or set top box and find the option to re-tune, scan or search for channels. Guide to Re-Scanning SAORVIEW APPROVED Equipment.
Why is my new TV not finding channels?
One of the most common reasons why TVs are not able to find channels is because there is a problem with their cable boxes. Restarting your cable box could clear it of any glitches that are stopping it from working as it should.
How do I connect my Saorview Connect Box to broadband?
You need to connect your new Saorview Connect box to broadband in order to access all the features of the service. We recommend that you connect to a fixed line broadband for best results. We recommend using an Ethernet cable to connect the box to your broadband router, or you can connect using a password protected Wi-Fi network.
Why can’t I access any on demand content on my Saorview box?
Go to Settings, select Picture & sound and adjust the lip sync delay to correct the problem. I can’t access any on demand content. Check that your Saorview Connect box is connected to the Internet. To do this go to Settings and then select Internet Connection.
Do I need an aerial to receive Saorview Connect?
Do I need an aerial to receive Saorview Connect? Yes, you need an aerial to receive Saorview Connect, as well as connecting to broadband. We recommend a professionally installed outdoor aerial for best results. In some areas, a good quality aerial in your attic or living room may suffice.
Why choose Triax?
It’s what we stand for. TRIAX’s seamlessly integrated hardware and software creates boundless opportunities for improved engagement and maximised revenues, adding true value to the solutions you offer your customers.
