How do you fix TV if I can here sound but no picture?
How do you fix TV if I can here sound but no picture?
Unplug the TV cord from the power socket. Leave it unplugged and while it’s unplugged press and hold the Power button on the TV for 25 seconds. Release the power button and plug the cord back in. Turn ON the TV using the remote control or manually and check if there’s picture on the Screen.
Does RCA TV have a reset button?
Hold down the menu button on the top or side of your TV for at least 10-15 seconds. An on screen menu will appear asking you to enter the time, date and location settings. Follow the onscreen instrucitons, and once completed your TV will reset to factory settings.
Why won’t my RCA TV turn on but red light is on?
You need to unplug it and hold down the power button while it is unplugged. Do that for about a minute then leave it unplugged for another few (5-10) minutes. Then plug it back in. Your error sounds like a power issue (possibly failed power board, bad fuse etc.).
How do I fix the sound on my RCA TV?
Press the “Menu” button and scroll to the “Set-Up” option, then go to “Preferences.” You’ll see a bar on the menu marked “Maximum Volume.” You can use that to limit how loud the TV can get, which can cause problems if you don’t know it’s been set.
Why is my TCL TV screen black but I can hear it?
If a TCL Roku TV’s screen has gone black but the audio still works, it is mostly due to loose cable connections or a hardware issue affecting your TV’s LED lighting. Unplugging the TV from all cable connections, including power, and then plugging it back in after 5-10 minutes resolves the issue.
How do I hard reset my RCA TV?
Why is there no picture on my TV screen?
Now there is no picture” sounds like a bad power board. Remove the back of your TV and take a look at all the boards. Check for obviously damaged components like leaking, domed looking capacitors etc. Post some images of your boards etc. with your question. That way we can see what you see.
Why is there no sound coming from my TV screen?
A bit for opening every modern gadget. sweetpeat23 could be a power supply issue, a T-con board issue as well as a main board or panel issue. You will have to do some preliminary checks. Turn the TV on and make sure that you have an audio. In a darkened room, point a flashlight beam at an angle against the screen.
How do I know if my TV has a backlight array?
In a darkened room, point a flashlight beam at an angle against the screen. See if you can make out silhouettes etc. If so, it’s your backlight. Time to check the main board and the power board. If those are okay, it’s your backlight array. If nothing shows, check to see if you have an onboard meny displaying.
How can I tell if my TV is faulty?
Remove the back of your TV and take a look at all the boards. Check for obviously damaged components like leaking, domed looking capacitors etc. Post some images of your boards etc. with your question. That way we can see what you see. Adding images to an existing question
