How do I set up my allworx phone?

How do I set up my allworx phone?

1. Plug a network cable into the network port on the bottom of the Allworx phone.
2. Connect the other end of the network cable to an available port on your network.
3. Plug in the power adaptor, if needed.
4. Once the phone boots and fails, press the Config soft key.

What information is required in My server page to register an Allworx Reach device?

To use the Allworx Reach application, the Allworx Server Administrator must provide information about connecting to the server. This includes server IP address or addresses, username, and password. Contact the Allworx Server Administrator for this information.

How do I access the allworx server?

To access the My Allworx Manager:

1. Open a Web Browser.
2. Enter the Allworx server’s LAN address into the address field of your browser and hit enter. Example: http://192.168.1.254.
3. When the page loads, Click the Login button.
4. Enter your username and Message Center (voicemail) password.
5. Click Submit.

What is allworx app?

The Reach mobile app extends the rich functionality of your Allworx VoIP communication system right to your iOS and Android devices. Allworx Reach Link ensures a seamless voice experience, even as your mobile data network changes. Used by. More Than. 120,000.

How do I remotely access my Allworx voicemail?

If you have an extension with the Allworx phone system, then you are able to check your voicemail from the outside. To check your voicemail remotely, dial 301-333-4757. Follow the voice prompts when entering your extension and PIN.

Is allworx a VoIP?

All-In-One VoIP Communication Platform | Allworx.

Who owns allworx?

PAETEC Holding Corp.
Allworx/Parent organizations

What devices are compatible with allworx reach?

Handsets include Allworx IP phones, activated Allworx Reach licenses, generic SIP devices, and analog devices. Requires Allworx System Software 8.1 or higher. Reach Link automatically connects active calls as the mobile data network changes from 4G to Wi-Fi, and vice versa.

How do I set up the phones for users on allworx?

Setting up Your Phones You’re ready to set up the phones for users on the Allworx system. To do this, you’ll: • Add Analog or SIP handsets • Add the Users and assign extensions • Add System Extensions • Set up or Change Call Routing • Define the Outside Lines You’ll need this much time

How does rereach link work?

Reach Link automatically connects active calls as the mobile data network changes from 4G to Wi-Fi, and vice versa. During brief network interruptions. While Reach Link is reconnecting the call, the other party will hear a brief down-tone and and an explanation.