What is a stator in a turbine?
What is a stator in a turbine?
In a turbine, the stator element contains blades or ports used to redirect the flow of fluid. A stator can be used to great effect to reduce the turbulence and rotational energy introduced by an axial turbine fan, creating a steady column of air with a lower Reynolds number.
What is stator in wind turbine?
The stator is the very important electrical part of the wind turbine. It contains all the coils of wire which will have voltage induced in them as the magnets pass over them. It’s defined as the ‘stator’ because it is the ‘stationary’ (it doesn’t turn) part of the alternator.
What is the difference between PMA and PMG?
PMAs use a thin aluminum housing and the stator is not pressed in. The Legacy PMG. features a very thick aluminum housing with additional cooling fins and a pressed in stator that helps with proper alignment and durability. PMAs have only two mounting holes.
What is the difference between pump and turbine?
As an introduction to turbomachinery, the essential difference between turbines and pumps should now be clear; as turbines are used to create energy out of fluid movement, and pumps are used to create fluid movement using energy.
What condensed steam?
A condensing steam turbine is provided with a vacuum device at its exit (the condenser) where the forced flow of an external coolant (water or air) maintains the outlet pressure at a level dependent only on the coolant inlet and outlet temperatures.
How does the stator in a water turbine work?
The stator sends the fluid returning from the turbine to the pump. This improves the efficiency of the torque converter. Note the spline, which is connected to a one-way clutch inside the stator. The stator resides in the very center of the torque converter. Its job is to redirect the fluid returning from the turbine before it hits the pump again.
What is the purpose of the stator?
A modern ATV stator is usually a “generator stator” meaning that its only purpose is to charge the battery. Some ATV stators, particularly older ones, have a source coil mounted on them which delivers the electrical current to the ignition system.
What is a rotor and a stator?
A rotor and stator are also in car alternators. The rotor is the center part that spins, and the stator is the outer stationary part that surrounds the rotor. Both are typically wound with magnet wire around a laminate core. The stator will typically have three windings to produce 3 phase power that is rectified by 3 diodes.
What is the stator of an electric motor?
Stator. In an electric motor, the stator provides a rotating magnetic field that drives the rotating armature; in a generator, the stator converts the rotating magnetic field to electric current. In fluid powered devices, the stator guides the flow of fluid to or from the rotating part of the system.
https://www.youtube.com/watch?v=TIwmMFNIjY4
