What size chain goes on Echo pole saw?
What size chain goes on Echo pole saw?
Replacement 12″ Micro-Lite chain for Echo Power Pruner. 12″ Chain for use with Bar Part #: 12G0ZD3744 or Bar Part # 12A0CD3744. Link Count: 44 Chain Gauge: 0.050″ Chain Pitch: 3/8″ File Size: 5/32″ Use for: PPF-265, PPF-266, PPF-280, PPF-2620, PPT-265, PPF-266, PPT-280, PPT-2620/H.
What size chain does a pole saw use?
Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain.
Why does the chain keep coming off my pole saw?
Why does my pole chainsaw keep coming off? The pole chainsaw chain may keep coming off because the tension is too loose. It may also come off if the chain is damaged.
What size chain does a echo?
ECHO Chainsaw Bar & Chain Quick Guide
| Chainsaw Models | Length in. (cm) | CHAIN Pitch (in.) |
|---|---|---|
| CS-303T/310/352 | 12″ (30 cm) | 3/8″ lp |
| 14″ (35 cm) | 3/8″ lp | |
| 16″ (40 cm) | 3/8″ lp | |
| CS-355T CS-355T/361P |
Why does my chain keep coming loose?
Your chain might simply be too old or can stretch over time. When this occurs you need to replace it. Consider that your loose chain also may be due to operator error. Exceeding the recommended gear range for the rear derailleur on your bike may lead to a droopy chain when you ride in these gears.
How do you sharpen a pole saw chain?
So to sharpen them you need to use a round file with the same diameter. The depth gauges are a little shorter than the tip of the cutters. This helps to cut into the wood. As you keep on using the pole saw chain and sharpening it, the depth gauge will become level with the cutters.
Do Oregon chains fit Echo chainsaws?
ECHO chain saws ship standard with Oregon bar and chains. The chain must have the proper gauge, pitch and drive link count in order to be used on the equipment.
What is a low profile pole saw Pruner chain?
ECHO’s 10″ in. low profile replacement pole saw pruner chain (91VXL39CQ) is designed for low vibration to deliver cutting efficiency and an aggressive cut. The increased top plate length offers extended sharpness of the cutters over time and decreases the amount of sharpening needed.
Is curcurbside pickup available for Echo?
Curbside pickup available. This item may not be available for pickup until tomorrow. ECHO’s 10″ in. low profile replacement pole saw pruner chain (91VXL39CQ) is designed for low vibration to deliver cutting efficiency and an aggressive cut.
Why should I replace my pole saw chain?
By replacing your chain with a genuine ECHO replacement pole saw chain that’s been manufactured to deliver maxium performance and reliability, you help to extend the life of your pole saw pruner bar and keep your equipment running at peak performance. You will need Adobe® Acrobat® Reader to view PDF documents.
