How do you power a macerator in Tekkit?
How do you power a macerator in Tekkit?
A macerator containing 16 overclockers requires 8 HV Solar Arrays to fully power. A macerator can also be powered by placing Redstone Dust in its bottom slot. This will power the macerator with up to 13 overclocker upgrades.
How can I make my Rotary macerator faster?
Overclocking. Adding one increases the maximum RPM by 500, making the maximum 10,500 RPM with 6 Overclocker upgrades. Adding a seventh Overclocker upgrade will not reach 11,000 RPM, instead will jump up to 10,800 RPM then fluctuate rapidly increasing and decreasing.
How do you power a generator in Tekkit?
To use, place one of the compatible fuels in the lower slot. The generator will output power at a rate of 10 EU/t. It will supply power when connected to machines via cables, or if a machine is adjacent to it. It is commonly used to power basic 32 EU/t machines such as the Batbox or the Electric Furnace.
How do you power a compressor in Tekkit?
A Compressor can also be powered by placing Redstone Dust in its bottom slot. This will power the Compressor with up to 13 overclocker upgrades.
How do induction heaters work?
An induction heater consists of an electromagnet and an electronic oscillator that passes a high-frequency alternating current (AC) through the electromagnet. The rapidly alternating magnetic field penetrates the object, generating electric currents inside the conductor, called eddy currents.
How do you make MJ in Tekkit?
MJ (Mega Joules) can be generated with BuildCraft Engines, Thermal Expansion Engines or the Blulectric Engine from RedPower 2, these engines produce MJ when recieving a redstone input and consuming fuel. It’s recommended not stay on Redstone Engines too long (or not at all) because they are very slow.
What type of transformer should I use with the mfsu?
A MV Transformer / LV Transformer should be used. The MFSU can charge items which store EU, such as the Nano Saber, in the MFSU’s top slot. In addition, the MFSU can drain EU from EU Storage Items, such as the Lapotron Crystal, if the item is placed in the MFSU’s bottom slot
How does an energy sensor kit work with an mfsu?
When a MFSU is right-clicked with an Energy Sensor Kit, it will yield an Energy Sensor Location Card, which can be used in the Industrial Information Panel to receive constant information about that MFSU. There are only five machines which can directly take power from an MFSU without transformer upgrades.
Can the mfsu output eV or HV?
If the player wishes to output EV into the MFSU, an HV Transformer must be used. Likewise, the MFSU outputs HV – Failing to convert HV into MV/LV will cause MV/LV Machines to blow up. A MV Transformer / LV Transformer should be used. The MFSU can charge items which store EU, such as the Nano Saber, in the MFSU’s top slot.
How many EU/T does the mfsu output?
It accepts a maximum of 512 EU/packet, or HV (High Voltage). It also outputs 512 EU/t, at HV. The MFSU outputs from the side with the orange dot. The position of the orange dot can be changed by right-clicking the desired side with a Wrench (IC2) or an Electric Wrench.
