How much does it cost to replace a tail light assembly?

How much does it cost to replace a tail light assembly?

If you decide to have a professional replace your tail light assembly, expect to pay anywhere from $200 to upwards of $500. The job can be even more costly if you have a high-end luxury or performance car.

How do you change a tail light assembly?

How To Replace a Tail Light

1. Step 1: Open trunk or tailgate.
2. Step 2: Pull tail lamp assembly out (if needed)
3. Step 3: Pull bulb out.
4. Step 4: Add bulb grease, put new bulb in.
5. Step 5: Reattach assembly (if needed)
6. Step 6: Repeat on other side.

How do you remove a tail light from a Hyundai Elantra?

Procedure

1. Open trunk.
2. Remove the cover and access the back of the tail light assembly.
3. Disconnect the electrical wire.
4. Remove the brake light socket by turning it counterclockwise.
5. Remove the brake light bulb from the socket by pulling it out.
6. Install the new brake light bulb into the socket.

How long does it take to replace a tail light assembly?

Be Prepared Fortunately, tail light bulb replacement isn’t difficult and shouldn’t take you more than 45 minutes to an hour to complete.

What does a tail light assembly include?

The Tail Light Assembly is the group of lights that are mounted on the rear-end of your vehicle. They consist of the tail-lights, brake-lights and the reversing lights. Each pair of lights serves a specific purpose for conspicuity during the night.

How do you change a rear turn signal bulb on a 2013 Hyundai Elantra?

Procedure

1. Park the Hyundai Elantra and set the parking brake.
2. Open the trunk by pulling on the trunk release.
3. Remove the rear turn signal socket.
4. Pull out the turn signal bulb from the socket.
5. Press the new turn signal light bulb into the socket.
6. Twist the turn signal socket clockwise to lock it in place.

What does the brake light mean on Hyundai Elantra?

Bad Switch: One common reason for the Parking Brake light to stay on is a failing or failed switch. This can be checked easily by jiggling the handle after it is down. If the light turns off (or turns off and then back on), the switch is the most likely culprit and will need to be replaced.

How do you remove a rear tail light assembly?

Open the trunk of your vehicle and locate the back of the tail light assembly. Disconnect the wiring harness from the back of the tail light assembly. Remove the tail light assembly mounting screws or nuts. Push the tail light assembly out from behind.

How much does it cost to fix a rear brake light?

If you don’t want to change the bulb yourself, a local dealer or auto repair shop can help. Replacing one bulb in an average car will cost $10-$55 labor plus the cost of the bulb ($1-$7). In some cars it’s easy to do; in others the taillight assembly might need to be removed in order to change a bulb.