Useful tips

Why is my hunter thermostat not working?

author 0

Why is my hunter thermostat not working?

If the thermostat is failing to activate the air conditioner or heating unit as desired, first be sure the selector switch is in the correct location. If you are still having problems, turn off power to the thermostat, remove its faceplate and confirm that the wires are connected to the proper terminals.

What does a flashing 3 mean on a Hunter thermostat?

A flashing 3 means the third setting is currently operating the heater or AC.

How do you use a hunter touchscreen thermostat?

How to Program Hunter Touchscreen Thermostats

  1. Touch the screen while it is in sleep/ready mode to turn on the Hunter thermostat.
  2. Tap the day that you want to set a program for on the screen.
  3. Touch the “Heat” or “Cool” icon to select the system you want to engage.

What is the color code for wiring a thermostat?

yellow
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).

What is SPAN mode on Hunter thermostat?

Span. The span setting regulates when and how long your system will run. The span has been set at the factory to 0.5º (in Fahrenheit mode) which will allow the system to turn on 1ºF above or below the set temperature and run for 1ºF above or below the set temperature.

Where is the reset button on my hunter thermostat?

Press and release the RESET button on the back of the front panel.

How do you change the battery in a hunter thermostat?

How do I Replace a Hunter Douglas Thermostat Battery?

  1. Lift the front cover of the thermostat upward.
  2. Push the battery release latch inward and upward to remove the battery housing unit cover.
  3. Insert two AA 1.5-volt batteries.
  4. Slide the battery housing unit cover over the batteries and back into position.

How do I program a hunter 44155c thermostat?

Press Hold/Return at any time to exit Program mode.

  1. Slide the System Switch to HEAT or COOL to program the corresponding system.
  2. Press Program to enter Program mode. (
  3. Press Up or Down to change the hour.
  4. Press Up or Down to change the minute.
  5. Press Up or Down to set the temperature.

How do you program a hunter Indiglo thermostat?

Indiglo Programmable Thermostat Instructions

  1. Step 1: Set the Day and Time. If the thermostat is displaying the wrong day, press the MENU button repeatedly until the setting you wish to change begins to flash.
  2. Step 2: Set the Day Programs. Press the SCHEDULE button to enter scheduling mode.

What happens if you wire a thermostat wrong?

Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.

author

Back to Top