Other

How do I reset my Linksys EA6500?

author 0

How do I reset my Linksys EA6500?

How can I reset the Linksys EA6500 v2 to factory defaults? Hold the Reset button of the Linksys EA6500 v2 on the back panel for about 10 seconds then release. Alternatively, you may use the web interface, go to the Troubleshooting tab > Diagnostics sub-tab, then click the Reset to factory default settings.

How do I setup my Cisco EA6500 router?

For the Linksys EA6500, you have to do the following steps for access:

  1. Put router into operation.
  2. Connect the device via Wi-Fi* or a network cable with the router.
  3. Start web browser.
  4. Insert IP address or URL into the address bar and confirm with ‘Enter’ button.
  5. Enter password in the open user interface and confirm again.

How do I access my Linksys EA6500 router?

With the EA6500 reset to factory defaults, open a web browser, go to http://192.168.1.1, and log in with the default username and password (both are admin).

How do I Reset my Linksys router to factory settings?

1 Factory Reset

  1. Ensure the router is ON.
  2. Using a paper clip, push and hold the Reset button.
  3. Hold the reset switch for 10-15 seconds.
  4. Disconnect and reconnect the router’s power adapter.
  5. Once it fully reboots, you can use the default username and password to connect the device.

What is the password for Linksys Smart WIFI?

admin
The default router password for all Linksys Smart Wi-Fi Routers is admin. However, it is recommended to personalize your password to ensure that the router is safe from unauthorized access.

How do I setup my Linksys wireless router AC1750?

Connect your router to your modem or modem router. Plug one end of the included internet cable to the yellow Internet port on your new router. If you have a modem, plug the other end into the Ethernet (LAN) port on the modem. If you have a modem-router, plug into any available port.

What is the admin password for Linksys router?

The default password for Linksys routers is admin. For optimum security, it is recommended to change this password during setup.

What is Linksys default password?

The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password. QUICK TIP: Changing the router’s password through the web-based setup page may prevent you from using the Linksys Connect software.

What is the Linksys default password?

How do I find the password to my Linksys wireless router?

On the Linksys Connect main screen, select Router settings. Step 3: The Router name and Password are found under the Personalize section. QUICK TIP: Your Router name and Password are also the wireless settings of your router.

How do I access my Linksys router settings?

How to access the router’s web interface

  1. Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter].
  2. Enter your login credentials in the fields provided. The default password is admin.
  3. To know if you have successfully logged in to the web interface, the screen below should appear.

How do I setup my Linksys router as an access point?

How to change a Linksys router to AP mode

  1. Connect a computer to the Linksys router and launch a web browser.
  2. Visit the following router configuration page:
  3. You are prompted to enter a username and password.
  4. Click on Advanced settings > Administration > Operation Mode.

author

Back to Top