Trending

How can I find my BSNL modem IP address?

author 0

How can I find my BSNL modem IP address?

To do this, first you need to enter into the Modem’s web page by typing http://192.168.1.1 in your browser. The modem might ask for user-name and password.

How can I get BSNL modem settings?

Modem configuration:

  1. In the Internet Explorer, type 192.168.1.1 and press enter.
  2. Type username as admin and password as admin and press OK.
  3. Click “Advanced Setup”
  4. Click Edit button against VPI/VCI -0 and 35.
  5. Click Next in the above screen.
  6. Select PPP over Ethernet (PPPoE) in the above screen.

How do I log into my BSNL broadband modem?

Login to your modem by typing 192.168. 1.1 and when asked for username and password, put both as ‘admin’ (without the inverted comma). Advanced Setup → WAN service. Under a field named PPP username, you will find your broadband user id.

How can I configure BSNL mobile WIFI modem?

Type 192.168. 1.1 in the address bar and hit enter. You will get a prompt asking to enter BSNL broadband modem username and password. Enter both username and password as “admin” or your modified password and hit on Login.

How do I log into my 192.168 0.1 IP address?

Login Steps

  1. Enter 192.168.0.1 into your browser’s URL bar, often referred to as the address bar.
  2. You should then be allowed into the login panel; this is where you enter your router username and password.

How can I change my IP address in BSNL?

  1. Open Command prompt→ Type ipconfig→Press Enter.
  2. Now type the router’s IP 192.168. 1.1 on any browser and press Enter.
  3. Here you need to make changes in the Main IP address field as shown in the red circle. Put your desired IP address of your router that you want to change.

What is the IP address of BSNL broadband?

Start up your favorite browser and type “http://192.168.1.1” on the address bar. Login using your default username and password which is usually admin and admin.

How can I change my BSNL broadband IP address?

Right click on the icon, select Properties, click on Internet Protocol(TCP/IP), click on Properties, click on “Use the following IP address” put the IP address as 192.168. 1.10, Subnet mask as 255.255. 255.0 and Default gateway as 192.168. 1.1 and Preferred DNS as 192.168.

How do I find my broadband IP address?

How to find the IP address of your router using Windows

  1. Right-click the Windows icon in the bottom-left of your screen, and select “Command Prompt.”
  2. In the Command Prompt window, type “IPCONFIG” and press Enter.
  3. Find the “Default Gateway” section. The number listed here is your router’s IP address.

How can I reset my BSNL WIFI?

Login

  1. Login. Type 192.168.1.1 on the address bar of your browser and press enter. Enter admin as username and password.
  2. Click on the Admin tab.
  3. Click on Reboot.
  4. Select the factory settings and click on reboot.

What is default IP address?

The IP address assigned to a computer by the network or an IP address assigned to a network device by the vendor of the product. Computers in a local network are assigned IP addresses within a range of internal addresses set aside for such purposes (see DHCP and private IP address).

What is the 192.168 0.1 password change?

Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1. Enter the default username and password (admin/admin in most cases). Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .

How to configure modem in BSNL Internet?

Now open up a Browser, Firefox or Internet Explorer and in the Address Bar type http://192.168.1.1/ . This will take you to the Modem Configuration page. Enter username: admin and password: admin when prompted. If it fails to authenticate then check your BSNL manual to get the username and password.

How to connect to BSNL Broadband PPPoE on Windows 7?

On Windows7/Vista go to Control Panel > Network and Sharing Center > Set up a New connection or Network. Select the first option, i.e, Setup a Wireless, Broadband or Dial-up and hit “ Next ”. Select the Broadband PPPoE and enter your username, password provided to you by BSNL. Also name the connection accordingly (say, BSNL BB).

How to configure the PC Settings for ADSL broadband?

The PC settings are the same for all brands of modem and are not dependent on whether a laptop or a desktop computer is used. To begin our ADSL broadband configuration process we have to click on the Start button and go the control panel. From there click on Network connections. Right Click on Local Area Connections and select Properties.

What are the DNS settings for BSNL Goa?

The DNS settings will be different for each location and will be provided by the local BSNL exchange. We also have the DNS settings for North Goa. Also for those interested the Default Gateway is 117.207.208.1 for North Goa. You can ping this ip to check your connectivity if your web browser does not display any website.

author

Back to Top