How do I read my BDP serial number?
How do I read my BDP serial number?
The only manufacturer identification is at the bottom corner of the data plate, as shown above. Older models may also only be identified by BDP Company. The second two numbers in the serial number are the year of manufacture, so the serial number below indicates the condenser was manufactured in 1995.
What brand is BDP?
Carrier Corporation formed the BDP Company in 1974, where Payne became the “P” in BDP. During the 1980’s Payne improved its product efficiencies and began to expand from its strength in the west and southwest into the Midwest and northeast.
How old is my CAC BDP boiler?
The date of production/manufacture or age of BDP® HVAC equipment can be determined from the serial number located on the data plate.
What do carrier model numbers mean?
The main purpose of the Carrier model number lookup is to know the size or tonnage of the air conditioner systems. Tonnage is a measure of BTU’s in 12,000 BTU increments. A ton of air conditioning equals 12,000 BTU. These are all reflected in the model numbers.
How do you read HVAC model numbers?
Look at the model number (Located on the data plate stamped on the actual side of the compressor) on the compressor and there should be a number divisible by 12. It should start at 18 and not be more than 60 for residential AC units. 18 to equal 1.5 tons and 60 to equal 5 tons of cooling.
How do I read my Tempstar serial number?
Tempstar is manufactured by International Comfort Products, LLC, and the first two numbers in the serial number (after a single letter) are the year of manufacture. So the serial number on the data plate below indicates the unit was manufactured in 2013.
How do I find out how old my HVAC unit is?
You will find a metal nameplate attached containing the system’s technical specification. On most units this is located on the backside of the cabinet. Sometimes the manufacturer birthdate will be listed as MFR DATE. If that is the case, then you know the age of the equipment.
How do I read my heat pump model number?
Look for the 7th and 8th digits, or maybe 8th and 9th digits, of the model number. It will be a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 48 divided by 12 equals 4, so the data plate below indicates the system is 4 tons.
How do you decode a carrier model number?
The most common way to to determine the carrier ac age is through the serial number. In the above style, the determining factor is having a letter in the middle of the serial number. The first two digits are the week of manufacturer. The second set of digits are the year of manufacture.
How do I read my AC model number?
How do you read a coil model number?
Starts here2:19Locate Your Evaporator Coil Model and Serial Numbers – YouTubeYouTube
How do I know the tonnage of my AC?
To estimate your AC tonnage needs, multiply the number of square feet you’re cooling times 25. This equals the total number of BTUs you need to adequately cool your space. Next, divide that number by 12,000 to determine the tonnage capability you need in your new air conditioning unit.
