What kind of transmission fluid does a Ford Fusion take?

What kind of transmission fluid does a Ford Fusion take?

Motorcraft® MERCON® LV is a premium-quality automatic transmission fluid recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require MERCON® LV type fluid.

What type of transmission fluid does a 2006?

DEXRON-VI Automatic Transmission Fluid
DEXRON-VI Automatic Transmission Fluid is suitable for use in vehicles that specify the following requirements: fully licensed and approved by GM, recommended for use in GM transmissions model year 2006 and newer calling for DEXRON-VI Automatic Transmission Fluid (replaces DEXRON-III and DEXRON-II(E), or recommended …

What kind of transmission fluid does a 2005 Ford Fusion take?

Motorcraft – MERCON® LV Automatic Transmission Fluid ATF, 1 Quart (Part No.

What type of oil does a 2006 Ford Fusion take?

Ford Fusion 2006, Extended Performance™ SAE 5W-20 Full Synthetic Motor Oil, by Mobil 1®.

What kind of transmission fluid does a 2007 Ford Fusion take?

The type of automatic transmission fluid the 2007 Ford Fusion uses is TLS ATF. The transmission fluid needs to be replaced every 30,000 to 60,000 miles. Along with fluid changes, terrible sounds will come from the transmission. Old transmission fluid will be awful to the ear.

What kind of transmission fluid do I use for 2008 Ford Fusion?

The 2008 Ford Fusion uses Mercon LV transmission fluid as standard in the car. This is recommended by Ford to provide You the best protection and lubrication for the gears in Your transmission. You should make sure to change Your fluid every 30,000 to 50,000 miles depending on the condition.

How many quarts of transmission fluid do I need for a Ford Explorer 2006?

The capacity for transmission fluid on the 2006 Ford Explorer is 11 quarts.To change the transmission fluid You will want to first make sure the car is level on the ground and then pop the hood open.

What type of transmission fluid does a 2006 Ford Freestar take?

Mobil 1 Synthetic Transmission Fluid Dexron/Mercon 1 Quart.

What kind of transmission fluid does a 2008 Ford Fusion take?

How much oil does a 2006 Ford Fusion hold?

4.5 quarts
Capacity: 4.5 quarts (with filter)After refill check oil level.

What is transmission fluid used for?

Transmission fluid is used to lubricate the components of a car’s transmission for optimum performance. In vehicles with automatic transmissions, this fluid also acts as a coolant.

What transmission is in the Ford Fusion Hybrid?

The Fusion is also available as a hybrid. That model has a 2.0-liter four-cylinder paired with a continuously variable automatic transmission (CVT) and an electric motor that together make 195 horsepower, or as a plug-in hybrid, with the same powertrain paired to a larger battery pack.

Can You overfill the transmission fluid?

Overfilling the transmission fluid will not cause seals to break, but they may leak. The transmission is vented so that pressure won’t build in the unpressurized areas. Transmission fluid can leak out these vents if it is too high. The seals higher in the transmission may also leak, but these seals are not pressurized.

What is Type F transmission fluid?

Valvoline™ Type F. Valvoline™ Type F is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. It is designed for use where Ford specifications M2C33-F, M2C33-G and Ford Type F fluids are recommended.