How many questions is the flaggers test?
How many questions is the flaggers test?
The class is presented in PowerPoint and will include a 25-question multiple choice exam and a flagger demonstration (dexterity test). A MD SHA-approved ATSSA (American Traffic Safety Services Association) flagger card will be issued upon satisfactory completion of this course.
Is being a flagger hard?
A Flagger’s Work Life Flagging can be a very fast-paced job, as roadwork is often done on a tight schedule. Like many construction jobs, a flagger has to be alert and focused at all times because the job can be dangerous.
How do you slow down traffic on a flag?
To alert or slow traffic, face traffic and slowly wave the flag in a sweeping motion of the extended arm from shoulder level to straight down without raising the arm above a horizontal position. Keep the free hand down.
What must be in place at a minimum before a flagging operation begins?
Prior to the start of flagging operations all signing must be in place. A good visibility location is one where the sight distance is sufficient and the flagger is clearly visible to approaching vehicles. When the temporary traffic control zone covers a long segment of highway, additional flagger signs may be needed.
Where do you stand when flagging?
STANDING IN A VISIBLE LOCATION Flaggers should stand in front of the first cone in a taper, per the published standards in that region. Flagging stations should always be highly visible and avoid visual obstructions such as trees, excessive shade, etc.
What factors affect a flaggers location?
Flagger stations are set up based on speed of traffic and other factors affecting the visibility of the flagger. Stand on the shoulder of the road or in the closed lane prior to stopping traffic. Stand where there is a color contrast between you and your background, avoiding shaded areas.
How much do flaggers get paid?
Salary Ranges for Traffic Control Flaggers The salaries of Traffic Control Flaggers in the US range from $66,780 to $172,590 , with a median salary of $122,950 . The middle 60% of Traffic Control Flaggers makes $122,950, with the top 80% making $172,590.
Do flaggers work in the winter?
The working conditions of flaggers are affected principally by weather conditions. However, if the weather is too severe for either construction workers to work or aircraft to take off, you may be able to move inside. Unfortunately, heat and cold are usually not enough to warrant a work stoppage.
What is the proper position of the two flaggers on each end of the two lane road?
When good visibility and traffic control cannot be maintained by one flagger station, traffic should be controlled by a flagger at each end of the section. The flagger should stand either on the shoulder adjacent to the road user being controlled or in the closed lane prior to stopping road users.
When used for emergencies flags should be?
09 Flags, when used, shall be red or fluorescent orange/red in color, shall be a minimum of 24 inches square, and shall be securely fastened to a staff that is approximately 36 inches in length.
How far apart should traffic cones be?
20 feet
Remember to always face traffic while placing or removing cones. Space cones equally at least 20 feet apart. Use 12 cones for the lane closure taper, which should be approximately 250 feet, and four cones along the activity area to quickly make the scene safer.
What are the three types of operations that Caltrans performs?
Traffic Operations
- Commercial Vehicle Enforcement Facility (CVEF)
- Legal Truck Access | CA Truck Network Maps.
- Transportation Permits (Oversize/Overweight Vehicles)
- Weigh-In-Motion (WIM)
- 45′ Buses & Motorhomes.
What is a flagger certification?
This course will prepare you with the necessary knowledge and skills needed to enhance the safety of both workers and drivers in a workzone. At the end of the course, you will receive a Flagger Certification card, which is valid for 3 years in Washington, Oregon, Idaho, and Montana.
What are the flagger training requirements in California?
Flagger Training Requirements Section 1599, “Flaggers” of the Construction Safety Orders (California Code of Regulations [8 CCR 1599]) requires that flaggers be trained in the fundamentals of flagging moving traffic before being assigned as flaggers.
What are the requirements of a flagger station?
FLAGGER STATIONS 1 Location. Flagger stations must be located such that the traveling public has sufficient distance to stop at an intended stopping point before entering the work space. 2 Rumble Strips. 3 Flagger Operations.
Where can I find a list of authorized flagger training providers?
The authorized flagger training provider list is available at the Caltrans Division of Construction website: https://dot.ca.gov/programs/construction/safety-traffic/safety-training-courses Flaggers are responsible for public safety and for temporary traffic control.
