How do you reset the SRS?
How do you reset the SRS?
How to Reset an Airbag Light
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
How do I reset my supplemental restraint?
Put the key into the ignition and turn on the vehicle, making sure you don’t start the engine. The paperclip shorts out the SRS light, thus resetting and turning it off. Plug the SRS power connector back into the fuse panel. Put the cover back on the fuse panel and shut off the vehicle.
How do you reset an airbag sensor?
Conclusion – How to Reset Airbag Light
- Turn your ignition on and off.
- Restart your vehicle and do a test drive.
- Examine the passenger airbag switch.
- Inspect whether seat belts are fastened or working correctly.
- Verify that the passenger seat sensor is not applied.
- Use a scanner with an SRS or airbag light reset option.
What is SRS light on Acura TL?
If your ACURA AIRBAG light is on, it means that there is a problem with the Supplemental Restraint System (SRS); one or all airbags will NOT deploy if you are involved in an accident.
What is a SRS light?
The SRS warning light indicates a malfunction in the airbag system, front passenger occupant classification system or the seatbelt pretensioner system.
How do you reset the SRS light on a Mercedes?
Unfortunately, the SRS Airbag light doesn’t reset on its own. Even if the problem has been addressed, you will need an Airbag scanner to reset the light. Very often the light goes on because of a dying battery. But once the light is on, it will stay on even when you install a new battery, until you manually reset it.
Can you reset airbag module?
All airbag control modules can be reset and reprogrammed, with the exception of flood, fire or hardware damage.
What does SRS mean on a Acura?
