What does BT stand for in tanks?

What does BT stand for in tanks?

The BT tanks (Russian: Быстроходный танк/БТ, romanized: Bystrokhodny tank, lit. “fast moving tank” or “high-speed tank”) were a series of Soviet light tanks produced in large numbers between 1932 and 1941.

Was the t26 a good tank?

It was a development of the British Vickers 6-Ton tank and was one of the most successful tank designs of the 1930s until its light armour became vulnerable to newer anti-tank guns. It was produced in greater numbers than any other tank of the period, with more than 11,000 units manufactured.

Is 1 heavy tank?

The IS-1 heavy tank were essentially upgraded KV-1 Heavy Tank models. The IS-1 was born out of a Soviet Army need for more formidable tracked weapon systems to combat the ever-growing power of German tanks – particularly the newer Panther and Tiger I series appearing by the end of 1942.

Is family a tank?

The IS Tank was a series of heavy tanks developed as a successor to the KV-series by the Soviet Union during World War II. The IS acronym is the anglicized initialism of Joseph Stalin (Ио́сиф Ста́лин, Iosif Stalin)….IS tank family.

Iosif Stalin tank
Type	Heavy tank
Place of origin	Soviet Union
Service history

Was the bt7 a good tank?

The BT-7 was the last of the BT series of Soviet cavalry tanks that were produced in large numbers between 1935 and 1940. It was lightly armoured, but reasonably well-armed for the time, and had much better mobility than other contemporary tank designs.

Are two tanks Chinese?

The IS-2 is a Chinese tier 7 heavy tank. Soviet IS-2 tanks were exported to China in the early 1950s and were used during the Korean War from 1950 through 1953. A few IS-2 tanks were exported to Vietnam, where they fought in the final stage of the Indochina War of 1946–1954. The IS-2 leads to the 110.

What tank did the M1 Abrams replace?

M60 tank
The M1 Abrams was developed from the failure of the MBT-70 project to replace the obsolescent M60 tank. There are three main operational Abrams versions, the M1, M1A1, and M1A2, with each new iteration seeing improvements in armament, protection, and electronics.

Was the e100 a real tank?

The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II. The largest of the Entwicklung series of tank designs intended to improve German armored vehicle production through standardization on cheaper, simpler to build vehicles.

What is the fastest tank?

1: T-14 ARMATA ( Fastest Tank ) It is powered by an 85 3a turbocharged diesel engine that produces 1,200 horsepower. A 12-speed automatic transmission is mated to the engine. The tank has a maximum road speed of 56 miles per hour and a cross-country speed of 37 miles per hour.

What was the most feared American tank in WW2?

Proving itself as the most effective tank destroyer of WW2, M18 Hellcats compromised overall protection for firepower and maneuverability.

Why were American tanks so bad in WW2?

The reason is that all WWII tanks were either mechanically unreliable, had serious reliability issues, had serious production issues, were designed on faulty doctrine on mind, were underpowered, undergunned and/or underarmoured or were atrociously over-engineered.

What happened to the BT-2 tank?

The BT-2 “fast tanks” saw endless exercises in ruthless conditions, which worn off prematurely their already sensitive, even fragile engines. The 37 mm (1.46 in) gun proved accurate but lacked penetrating power compared to the new 45 mm (1.77 in) already used by the T-26. Thus came the idea of an upgunned version, later materialized as the BT-5.

What was the T-26 tank used for in WW2?

The T-26 and BT were the main tanks of the Red Army’s armoured forces during the interwar period. The T-26 was the most important tank of the Spanish Civil War and played a significant role during the Battle of Lake Khasan in 1938, as well as in the Winter War in 1939–40.

What kind of gun does a BT-2 have?

Because of this, many BT-2s were delivered with a mixed armament of DP-DT machines guns only or a 37 mm (1.46 in) gun with or without a single coaxial DT machine-gun. The standard configuration included the gun and a coaxial DT machine-gun mounted in an oblique fixed position, in the Japanese style. Its traverse depended on the turret.

What’s the difference between a BT-2 and BT-3?

Before the production came to an end, the BT-3 was built according to Soviet specifications. These were virtually identical to the “regular” BT-2s, only differing by the use of the metric system for their construction instead of the old Imperial one. However this was only a factory designation, the army still registered them as BT-2s.