Should the blue light be on on a Worcester boiler?

Should the blue light be on on a Worcester boiler?

The blue light on a Worcester Bosch boiler is typically there to highlight that the boiler has power going to it. In addition, it may point to a socket failure – it is worth checking a few other appliances in the house to check that they work OK, using the same socket that the boiler is usually plugged into.

What is the blue light on a Worcester boiler?

When a Worcester Bosch has a fast flashing blue light this means the boiler has gone into service mode. This could be for two potential reasons. Either the boiler has been serviced recently and has accidentally been left in its service mode or, alternatively, you may have accidentally knocked the switch yourself.

What does green light on boiler mean?

Usually, when modern boilers need resetting they will display a fault code or begin to flash a red or green light. These signals indicate that your boiler senses a problem, which is why it has stopped working and needs to be reset.

Why is my Worcester boiler not igniting?

If the boiler is not igniting, there is a possibility the valve is blocked, seized or there is damage in the wired connections. No Pilot Light: When the boiler is not igniting and the pilot light has gone out, this usually means debris has blocked the jet.

How do you reignite a Worcester Greenstar boiler?

In most cases, you will simply need to hold the button marked ‘reset’ for three seconds. In some models you may see a reset light at the end of the temperature dial. In this case, just turn the dial down to the reset light, leave it there for three seconds and then turn it back to its original position.

How do you reset a Worcester Greenstar RI boiler?

– Turn the Central heating temperature knob anticlockwise to the “RESET” position and hold for approximately five seconds and then turn the knob back to the original temperature setting. – Wait two to three minutes for the boiler to restart.

How do I reset my Worcester Greenstar RI boiler?

Worcester Greenstar Ri Boiler Reset To reset the boiler turn the Central heating temperature knob anticlockwise to the “RESET” position and hold for approximately five seconds and then turn the knob back to the original temperature setting.

Should the burner light always be on?

When heat is required, the pilot light will inflame that gas and send it to the burners. The pilot light must always stay on or gas will easily escape. If the pilot light keeps turning off, then your boiler is not working.

How do I reset my Greenstar RI?

To reset the boiler: ► Turn the Central heating temperature knob anticlockwise to the “RESET” position and hold for approximately five seconds and then turn the knob back to the original temperature setting.

What does the green light on my Worcester Greenstar ri boiler indicate?

The green light on your Worcester Greenstar RI boiler indicates that burner is working. Generally, there are two explanations behind it. Firstly, LED Failure is an obvious explanation & I would suggest replacing it immediately. However, if the boiler is working properly then, it is not necessary to change the LED.

What does a blue light mean on a Worcester Boiler?

A blue light flashing on a Worcester RI boiler indicates there’s a problem with gas supply, flue blockages or the condensate unit. The blue light on an RI will flash when it detects no gas supply, or low pressure. This could be a range of things such as a faulty gas valve.

What does the green light on my boiler mean?

The green light is solid and static. The water and gas are both on at the transmitter unit. Have tried a hard reset using the function on the boiler, and reset the boiler but no further. The pressure gauge is at around 1.5.

Why is the blue light flashing on my boiler?

There are, however, five potential causes of the blue light flashing: If you have a Worcester Bosch Ri boiler, a blue light will flash if no has is being supplied to your unit. If you need to determine if there is a fault with your gas supply or boiler, you should check any of your home’s other gas appliances like the hob, oven or fire.