How do you change the fuel line on a Craftsman Weedwacker?
How do you change the fuel line on a Craftsman Weedwacker?
Starts here4:35How to Replace the Fuel Line in a Line Trimmer – YouTubeYouTubeStart of suggested clipEnd of suggested clip57 second suggested clipOnce you have the line in the hole use hemostat forceps or needle nose pliers to reach into the tankMoreOnce you have the line in the hole use hemostat forceps or needle nose pliers to reach into the tank. And grab the fuel line then pull the line through the fuel tank filler opening.
What size is trimmer fuel line?
The fuel line has an outer diameter of 9/64th inches and an inner diameter of 5/64th inches.
Why does my Weedeater have two fuel lines?
The supply lines need to connect to the fuel tank so that, when the weed eater is held in the operating position, they are below the fuel level. The vent and return lines will typically attach higher up. The lower line on the carburetor should be the supply line, the upper one would be above fuel to vent air.
What fuel line goes to the carburetor?
The (clear) main fuel line with the filter (filter inside the fuel tank) goes to the bottom of the carburetor (or the elbow shaped nipple). The (clear) fuel intake line runs from the top of the carburetor (straight nipple) and goes to the short post on the back of the primer bulb.
How do you start a Craftsman 32cc Weedwacker?
Starts here2:16Beginner’s guide How to start a weedeater – YouTubeYouTube
How do you change the fuel line on a Weedeater?
Starts here10:45Weedeater Fuel Line Replacement – YouTubeYouTube
Which fuel line goes where on a Weedeater?
Starts here2:13Weedeater Fuel Line Configuration – YouTubeYouTube
How do you fix the fuel line on a Weedeater?
How do you put fuel lines on a Weedeater?
How do you start a Craftsman gas Weedwacker?
How do you start a Craftsman Electric Weedwacker?
Starts here1:14Craftsman Speed Start Technology – YouTubeYouTube
How do you install a fuel line on a Weedeater?
