Does Spectralock grout need to be sealed?

Does Spectralock grout need to be sealed?

As an added bonus, unlike traditional cement grout, epoxy grout does not need to be sealed, due to its non-porous nature. Tiles must also be cleaned thoroughly prior to applying epoxy grout. Epoxy can discolour porous surfaces, such as natural stone, so these surfaces should be sealed prior to grouting.

Is Spectralock sanded?

Available in all 40 LATICRETE colors, SPECTRALOCK® 1 has uniform color consistency using SPECTRALOCK sand and is Stainproof^.

How long does it take for laticrete epoxy grout to dry?

After about 40 minutes it’s not fluid enough to work into joints effectively, in 3 hours the grout is very hard, and cured in 24 hours. (7 days for full stain resistance though) In contrast, cement based grout has a working time of many hours and takes 27 days to fully cure.

Do you need to seal Spectralock 1?

SPECTRALOCK 1 Pre-mixed Grout never needs sealing. In fact, a sealer would not bond to the SPECTRALOCK® 1 Pre-mixed Grout.

Do I want sanded or unsanded grout?

Unsanded grout should be used in joints that are less than 1/8-inch-wide. It has a smooth texture and clings well to vertical surfaces, which makes it useful for grouting ceramic wall tiles. Sanded grout should be used for flooring and wall tile joints wider than 1/8 inch because it resists shrinkage and cracking.

What is kerapoxy grout?

Kerapoxy® is a premium-grade, water-cleanable, 100%-solids, high-strength epoxy mortar and chemical-resistant nonsagging grout system. Available in all MAPEI colors for grouting, Kerapoxy is excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance.

How do you clean Spectralock grout?

A solution of 2 gallons of clean water and packet of LATICRETE Cleaning Additive is recommended to completely remove any residual grout film/haze. Using a well wrung, clean white scrub pad, clean entire tile surface with a light circular motion. Rinse scrub pad frequently.

Is laticrete a good grout?

It provides exceptional durability, extreme versatility, and excellent color consistency – even grouting in the most demanding applications.

Do you need to seal laticrete grout?

LATICRETE SPECTRALOCK® PRO Premium Grout, LATICRETE SPECTRALOCK PRO Grout, and LATICRETE SPECTRALOCK 2000 IG are epoxy based grouts, and, as such, do not require the use of a grout sealer.

What is spectralock dazzle Grout?

A unique design component, SPECTRALOCK DAZZLE adds metallic and “Glow-In-The-Dark” enhancements to SPECTRALOCK PRO Premium Grout and SPECTRALOCK PRO Grout. These high-end design elements offer limitless imaginative applications. Use SPECTRALOCK DAZZLE on walls and floors. Add a metallic look to plain tile and stone.

What is dazzle Grout made of?

LATAPOXY ® Dazzle Grout is an epoxy grout specifically designed to enhance aesthetics. It is available in 3 finishes – Gold, Silver & Copper Mixing & Application: Before grouting, remove all dust & impurities from the tiles. Dampen the tiled surface with a sponge

How do you color grout lines?

This coloring is applied using a small container that looks like a thick marker or pen. You press the pen along the grout line, and a narrow-pointed tip makes it easy to do it with precision.

What color Grout pen should I use?

You can also go bold with a black grout pen. Apply it to light-colored grout and watch your entire bathroom or kitchen transform right before your eyes. If you want to create some definition, use a white or brightly colored grout pen over darker grout. This will make your tiles stand out, and it adds a fresh, updated aesthetic to any space.