Is it safe to drive with P0013 code?

Is it safe to drive with P0013 code?

While you can drive with a P0013 code for a short period, it’s best to repair it as soon as possible. If you have to wait for repairs, it’s best to drive the vehicle as little as possible. The longer it takes for repairs, the worse the problem will become, and the more likely that severe engine damage will occur.

Is it safe to drive with p0014 code?

A faulty timing chain can cause serious engine damage. Continuing to drive your car can lead to further damage and a higher repair bill. Ideally, you want to drive to your nearest mechanic to get the problem looked at as soon as possible.

What is a camshaft position actuator solenoid?

A camshaft actuator solenoid –normally installed in the front of each cylinder head — is used to precisely control the flow of oil into the camshaft actuator. This changes the rotation of the camshaft to adjust valve timing and valve overlap on the go.

Can low oil cause P0013?

Sludge buildup can cause a P0013 trouble code Sludge is caused by running the engine at low oil levels, neglecting oil changes or going too far on an oil change, poor PCV operation or using a poor quality oil. Change the oil, clear the code and drive the vehicle.

What is P0014 code?

What Does Code P0014 Mean? The variable valve timing system increases fuel economy and engine performance by regulating when the intake and exhaust valves are opened and closed. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be.

What does P0014 code mean?

How serious is P0014?

Can dirty oil cause P0014?

Since P0014 has something to do with the position of the exhaust cam, the problem can be traced to the camshaft phaser and related components, which includes the oil control solenoid and the oil viscosity. Yes, P01144 can be caused by dirty or sludgy motor oil.

What is P0013 engine code?

P0013 is the OBD-II generic code indicating that the engine control module (ECM) has determined that the bank 1 exhaust camshaft OCV has an open or short circuit.

What is code P0014?

What does error code p0013 mean on the Chevy Cobalt?

P0013 is a somewhat frequent OBDII trouble code. It is generic, which means that it has the same meaning for the Chevy Cobalt, as it would any other vehicle. It only affects vehicles with Variable Valve Timing.

What causes p0014 code on DTC?

DTC P0014 can be caused by several things that can affect your variable cam timing system performance including using the wrong viscosity engine oil. However, since you have the DTC P0013, it is pretty obvious that the problem is being caused by a circuit malfunction in the control solenoid circuit.

What does the oil control valve do on a p0013?

The oil control valve uses the motor oil in the engine as hydraulic fluid to facilitate this adjustment in cam position. When P0013 is thrown, it may leave the camshaft in question in a position that may be on the power side, the economy side, or anywhere in-between.

What does the p0013 code on the ECM mean?

Since P0013 means that the ECM is reporting that there is a short or open condition in the wiring that is coming to/from the oil control valve, wiring often ends up being the problem. You’ll need to lookup the specs for your particular year and model. Here’s a pretty good video on finding a short (YouTube).