Popular guidelines

How do I reset my Ruckus access points?

author 0

How do I reset my Ruckus access points?

Follow these steps to reset an AP to its factory default settings.

  1. On the menu, click APs.
  2. From the access point list, click the name of the AP that you want to reset to factory defaults.
  3. In the upper-right corner of the page, click More to display a drop-down menu, and then click Factory Reset.
  4. Click Yes.

How do I reset my Ruckus AP via command line?

Log-in to the AP CLI using Putty application. set factory is the command to reset the Standalone AP to factory default settings.

How do I reset my Ruckus access point r500?

Press and hold the button which says hard reset within a tiny circular hole for 10 to 12 seconds. During the entire time, you press and hold the hard reset button the device should not reboot, only once you release the button the AP should reboot, which means your factory reset procedure was correct.

How do I reset my ruckus ZD 1200?

Factory Default button. To reset ZoneDirector to factory default settings, press and hold the F/D button for at least five (5) seconds. For more information, refer to Alternate Factory Default Reset Method.

How do I factory reset my ruckus H510?

Use a straightened paper clip to press and release the Hard Reset button for eight seconds or more to reset the AP to factory defaults. Use a straightened paper clip to press and hold the Soft Reset button to reboot the AP. This is the same as removing power and then and restoring power to the H510.

How do I upgrade my Ruckus AP firmware through command line?

– Standalone AP can be upgraded via CLI through FTP/TFTP. – Download the AP image file from the Ruckus Support Portal and follow the below procedure to upgrade the AP via CLI. – Place the image file in the root directory of FTP/TFTP sever. – You can verify the FTP/TFTP settings on the AP using ‘fw show’ command.

How do I reset my ruckus unleashed password?

If you forget your username or password, click the Forgot username or password?. To retrieve your username, contact the Ruckus Support team from here: https://support.ruckuswireless.com. To reset your password, enter your username and click Submit.

How do I factory reset my ZoneDirector?

You can follow those instructions to set up ZoneDirector after restoring factory defaults.

  1. Go to Administer > Backup.
  2. Locate the Restore to Factory Settings and click the button.
  3. When this factory reset process begins, you will be logged out of the web interface.

How do I manually update my Ruckus AP firmware?

Ruckus Unleashed Firmware Update Instructions

  1. Click on Administration.
  2. Click on Upgrade.
  3. Select Local Upgrade.
  4. Select Browse and let the firmware upload to the Master AP.
  5. When the Firmware is fully uploaded click the blue Reboot button to complete the upgrade process.

How do I access my Ruckus access point?

To access the device, type the following URL into your browser: https://192.168.0.1. A security alert will be displayed. You can securely go ahead.

How do I change my Ruckus access point password?

Follow these steps to change your Ruckus Cloud Wi-Fi password.

  1. On the miscellaneous bar (located in the upper-right corner of the Ruckus Cloud web interface), click . A submenu appears.
  2. Click Change password.
  3. In Password, type your new password.
  4. In Confirm Password, retype the password your typed in the previous step.

author

Back to Top