How do you unlock the ViewSonic power button?

How do you unlock the ViewSonic power button?

To lock and unlock the Power Button press volume down once, volume up once, the gear once, and home once.

How do I turn on my ViewSonic monitor?

Press the Power button to turn on the monitor. 3. To turn the monitor off, press the Power button again. NOTE: The monitor will still consume some power as long as the power cord is connected to the power outlet.

How do I remove OSD lock from ViewSonic monitor?

Press and hold down the button labelled “1” as well as the “down” arrow. After 10 seconds, release both buttons simultaneously. This should unlock the OSD, which gives you full access to the monitor’s control panel.

How do I reset my Viewsonic monitor?

Button Shortcut

  1. Press the power button on your ViewSonic monitor to turn off the power.
  2. Locate the plus or up button on the monitor.
  3. Press and hold the plus or up button and the power button simultaneously. Continue pressing both buttons until an on-screen message reading “All reset” appears.
  4. Release both buttons.

How do I remove power button lockout?

To remove the OSD Lockout message, release the Power button (if something was pressing against it), and press and hold the button again for about 10 seconds, until the message goes away. If the OSD Lockout message does not go away, the button may be stuck or the hardware behind the button might have become defective.

How do I wake up my ViewSonic monitor?

Turn on your LCD monitor, if it isn’t on already. If it is currently in sleep mode, the status LED on the front panel will be yellow. Move your mouse back and forth a few times. This will usually wake up a monitor.

Why is ViewSonic touch screen not working?

If you have a ViewSonic Interactive Flat Panel display that is not responding to touch it could be that the “touch” feature has been inadvertently disabled. To re-enable the “touch” capability do the following: On the front of the display on the bottom right are a series of buttons: Press the “Volume Up” button 3 times.

author

Back to Top